MSRP Price: $58.95
Our Price: $43.88
Fitment Note for Yamaha V-max 700 XTCP 1998
for models w/USI skis
NOTE: Some models require drilling extra hole(s) in skis to mount carbides
NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14-3/4 in. long
Length/Diameter: 18-3/4 in./7/16 in.
Stud Diameter/Length: 5/16 in./2 in.
Number of Studs: 4
Stud Center Mounting Distance From:
Front to 1st: 1-1/8 in.
1st to 2nd: 4-1/2 in.
2nd to 3rd: 6-1/4 in.
3rd to 4th: 4-7/8 in.
4th to End: 2 in.
|Degree of Carbide||60 Degree|
|Length - Carbide||4 in.|
Part 031372 fits the following machines