Overview of Sno-Stuff X-Calibar II Carbide Wear Rods - 505-619
NOTE: Some models require drilling extra hole(s) in skis to mount carbides
NOTE: Wear rods replace the originals exactly on all models except those with E-Z Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 28 in. design. If you wish to retain the E-Z Steer plate, order part number 10533 for an X-Calibar I or part number 10610 for an X-Calibar III Plus design with 5 in. or 60º carbide. Both are 14-3/4 in. long
Length/Diameter: 22 in./7/16 in.
Stud Diameter/Length: 5/16 in./1-3/4 in.
Number of Studs: 4
Stud Center Mounting Distance From:
Front to 1st: 6-3/4 in.
1st to 2nd: 3 in.
2nd to 3rd: 6-3/4 in.
3rd to 4th: 3-1/2 in.
4th to End: 2 in.
Cross reference number(s):505619
Specs for Sno-Stuff X-Calibar II Carbide Wear Rods - 505-619
|Degree of Carbide||60 Degree|
|Length - Carbide||4 in.|
Fitment for Sno-Stuff X-Calibar II Carbide Wear Rods - 505-619See if this part fits your ride
Part 03715 fits the following machines
- 1997 Yamaha Mountain Max 800
- 1997 Yamaha V-Max 4 800