NOTE: Wear rods replace the originals exactly on all models except those with EZ-Steer either as original equipment or installed later. For those models, the wear rods listed replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 27-3/4 in. design. To retain the EZ-Steer feature, you must order the standard wear rod part number 031617 or Bergstrom hard-surfaced wear rod 031461
NOTE: For Indy Sport 87, Long Track Reverse 86-87 this wear rod is longer than the original in the rear and has additional hard surfacing to help prevent excessive ski wear.
Length/Diameter: 28-1/2 in./3/8 in.
Stud Diameter/Length: 5/16 in./1 in.
Number of Studs: 3
Stud Center Mounting Distance From:
Front to 1st: 13-1/4 in.
1st to 2nd: 7 in.
2nd to 3rd: 7 in.
3rd to End: 1-1/2 in.
|Length - Carbide||0 in.|
Part 031555 fits the following machines