Dennis Kirk Inc.
Legendary Service... Ask Your Friends - Since 1969
Need Assistance?
Over 150K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Skinz Protective Gear Float Plate - YFP650-BK

  • Part #: 495332
  • Manufacturer Part #: YFP650-BK

MSRP Price: $142.95

Our Price: $128.66

You Save:
$14.29 (10%)
2 on Hand

Overview of Skinz Protective Gear Float Plate - YFP650-BK

  • Increases your flotation
  • Tough construction from highly-durable HMW-PE material provides a puncture-resistant barrier
  • Works with all bumpers
  • Made in the U.S.A.

Included Items:
(1) Float Plate
(4) Frame Clamps
(4) 6mm-1.00 x 30mm Tapered Phillips Head Screws
(2) 6mm-1.00 x 35mm Tapered Phillips Head Screws
(2) 6mm-1.00 x 20mm Tapered Phillips Head Screws
(4) 6mm Flat Washers
(4) 6mm-1.00 Nylock Nuts
(4) 6mm-1.00 Nut Plates
(2) 6mm x 10mm Spacers
(4) 6mm x 15mm Spacers

Specs for Skinz Protective Gear Float Plate - YFP650-BK

Color Black
Color - Primary Black
Position - Skid Plate Full Chassis
Type - Skid Plates Float Plate
Units Each
Weight 5.10 lbs

Specs for Skinz Protective Gear Float Plate - YFP650-BK

Color Black
Color - Primary Black
Position - Skid Plate Full Chassis
Type - Skid Plates Float Plate
Units Each
Weight 5.10 lbs

Fitment for Skinz Protective Gear Float Plate - YFP650-BK

See if this part fits your ride

Part 495332 fits the following machines

Yamaha
  • 2014 Yamaha FX Nytro
  • 2013 Yamaha FX Nytro
  • 2012 Yamaha FX Nytro
  • 2011 Yamaha FX Nytro
  • 2010 Yamaha FX Nytro
  • 2009 Yamaha FX Nytro
  • 2008 Yamaha FX Nytro
  • 2010 Yamaha FX Nytro MTX
  • 2009 Yamaha FX Nytro MTX
  • 2008 Yamaha FX Nytro MTX
  • 2008 Yamaha FX Nytro MTX 40th Anniversary
  • 2012 Yamaha FX Nytro MTX SE w/153in. track
  • 2011 Yamaha FX Nytro MTX SE w/153in. track
  • 2010 Yamaha FX Nytro MTX SE w/153in. track
  • 2012 Yamaha FX Nytro MTX SE w/162in. track
  • 2011 Yamaha FX Nytro MTX SE w/162in. track
  • 2010 Yamaha FX Nytro MTX SE w/162in. track
  • 2014 Yamaha FX Nytro MTX w/153 inch track
  • 2013 Yamaha FX Nytro MTX w/153 inch track
  • 2014 Yamaha FX Nytro MTX w/162 inch track
  • 2013 Yamaha FX Nytro MTX w/162 inch track
  • 2013 Yamaha FX Nytro RTX
  • 2012 Yamaha FX Nytro RTX
  • 2011 Yamaha FX Nytro RTX
  • 2010 Yamaha FX Nytro RTX
  • 2009 Yamaha FX Nytro RTX
  • 2008 Yamaha FX Nytro RTX
  • 2008 Yamaha FX Nytro RTX 40th Anniversary
  • 2010 Yamaha FX Nytro RTX SE
  • 2009 Yamaha FX Nytro RTX SE
  • 2013 Yamaha FX Nytro XTX
  • 2012 Yamaha FX Nytro XTX
  • 2011 Yamaha FX Nytro XTX
  • 2010 Yamaha FX Nytro XTX
  • 2009 Yamaha FX Nytro XTX
  • 2014 Yamaha FX Nytro XTX 1.75
  • 2013 Yamaha FX Nytro XTX 1.75

Float Plate - ACFP100-BK

4 out of 9 reviews
FitFinish:
Value:
Quality:
Style:


Fit/Finish:
Value:
Quality:
Style:

Good Skid Plate

This is a full length skid plate. I had some damage to the bottom of my M1000 and needed to prevent that in the future. This skid plate covers everthing from the bumper down to almost the track. Pretty good coverage and it is very thick plastic so I don't think it can be damaged. It isn't a super tight fit between the front of the machine and the snow gets in there but it passes through ok.

Review By:

from Albuquerque, NM

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

Float Plate is a Good Buy

Fit was good, one of the predrilled holes was a bit off, but it could have been on my 2008 Ski Doo MXZ as well. A note of caution, as it states in the description/ instructions between the float plate and the chasis it does fill with snow and will need to be removed inbetween rides. If you don't have a heated shop to melt away the snow/ ice it may become difficult. Also water does stay in the plate, but can be removed by tipping the sled to one side or the other.

Review By:

from Wisconsin

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

skinz float plate

fit great, not long to install. was short two rivots but picked some up at napa

Review By:

from western north dakota

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

Worked on my rmk

PFP 250 fit good on my 2009 RMK 600 144 with the narrow front end and aluminum bumper. Follow the instructions and check for coolant lines before you drill. If you rush the drilling you might get to change your coolant early.

Review By:

from Minnesota

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

Very Unhappy

Ordered this product for a 2008 700 IQ got the plate and it did not fit. It Was like it was not molded for the A-arms and had a gap of an inch and a half from bulk head worked with dennis kirk customer service which were very easy to deal with and they contacted manufacter and was told you may have to heat, cut and trim this $115 dollar skid plate to fit, I returned product and ordered a Holeshot brand and even though it does not cover as much, it fit on correctly like all my other holeshot ones purchased in the past

Review By:

from Iowa

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

its very durable

nice and tough....fit isnt form fitting but lines up all right.i would recommend

Review By:

from thief river falls ,MN

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

Great addition

We added this to our Phazer for added protection while trail riding. Great fit, easy install and a little more confidence. I'd recommend this to anyone.

Review By:

from Fremont, MI

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

Review By:

Instructions and Manuals for Skinz Protective Gear Float Plate - YFP650-BK