Dennis Kirk Inc.
Legendary Service... Ask Your Friends - Since 1969
Need Assistance?
Over 150K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Samson Crossover Header Pipes - FL3-223

  • Part #: 4404480
  • Manufacturer Part #: FL3-223

Original Price: $481.91


Closeout Price: $361.43

You Save:
$120.48 (25%)
1 on Hand

Overview of Samson Crossover Header Pipes - FL3-223

  • Chrome-plated, heli-arc welded true dual-header system
  • Eliminate the scavange pipe, which allows the system to quickly move the exhaust gases; improves air flow and reduces heat on the right side
  • Heat shields, clamps and mounting brackets included
  • Crossover-style headers accept mufflers designed for use on OEM 95-up pipes, such as Samson Rolled Thunder or Silver Bullet®
  • Must purchase mufflers separately
  • Made in the U.S.A.

Included Items:
(2) Head Pipes
(3) Heat shields
(1) 5/16-18 Flat washers
(1) 5/16-18 nylock nuts
(1) 1-3/4-18 x 1 in. hex head bolts
(2) 1-7/8 in. barrel clamps
(4) 5/16-18 x 1-1/2 in. hex head bolts
(4) 5/16 in. lock washers
(7) #24 hose clamps

NOTE: Will also fit FLHTCUTG 09 (trikes) if adapter kit 44-05604 is used

NOTE: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information

NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (bluing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See the CHEMS/LUBES section for products that will help prevent or remove bluing.

NOTE: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the exhaust manufacturer directly with questions regarding any modifications that may need to be made during or after installing their product. If a jet kit or fuel processor is recommended, see the FUEL/INTAKE section

The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.

Specs for Samson Crossover Header Pipes - FL3-223

Color - Primary Silver
Finish Chrome
Type - Exhaust - Head Pipes & Mid Pipes Head Pipe
Units Set
Weight 16.45 lbs

Specs for Samson Crossover Header Pipes - FL3-223

Color - Primary Silver
Finish Chrome
Type - Exhaust - Head Pipes & Mid Pipes Head Pipe
Units Set
Weight 16.45 lbs

Fitment for Samson Crossover Header Pipes - FL3-223

See if this part fits your ride

Part 4404480 fits the following machines

Harley-Davidson
  • 2009 Harley-Davidson Electra Glide Classic - FLHTC
  • 2009 Harley-Davidson Electra Glide Standard - FLHT
  • 2009 Harley-Davidson Electra Glide Ultra Classic - FLHTCU
  • 2009 Harley-Davidson Road Glide - FLTR
  • 2009 Harley-Davidson Road King - FLHR
  • 2009 Harley-Davidson Road King Classic - FLHRC
  • 2009 Harley-Davidson Street Glide - FLHX
  • 2009 Harley-Davidson Tri Glide Ultra Classic - FLHTCUTG

Crossover Header Pipes - FL4-224B

5 out of 2 reviews
Fitment:
Sound:
soft loud
A Little Loud
Finish:
Performance:


Fitment:
Sound:
soft loud
A Little Loud
Finish:
Performance:
Images for this Review:

Samson Duels

First of all I really like these pipes. Secondly I only got these to make my life simpler. I had to remove the stock exhaust to access all the screws on a loose trans trap door. Again to check the cam chain tensioners. With the Samsons I will only have to remove the right side. I already had Samson Rolled Thunder mufflers so the Samson headers were a no brainer. They sound great and who really knows about the 20% performance increase some have touted (I'm not running out to get it dyno'd). I did have a problem getting the one muffler on, but after talking to Samson, we determined the pipe was slightly out of round and I was able to fix that issue. The only draw back is that the left side loops out a little more than the stock pipes which can affect those riders with not so long legs.

Review By:

from Las Cruces NM

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

Great headers!

Looking around, these are the best value and fit. It took me 3-1/2 hours overall (ripout to finish) using only supplied pipes and hardware, no modifying my bike! Sounds fantastic and looks even better!

Review By:

from San Diego, CA

Was this review helpful to you?


Instructions and Manuals for Samson Crossover Header Pipes - FL3-223

You May Also Be Interested In