Overview of Saddlemen Rigid-Mount Specific-Fit Quick-Disconnect Drifter Saddlebags - 3501-0389
Dimensions: 18 in. L x 6 in. W x 13 in. H
(4) 5/16 x 1-1/2 Fender washers
(4) 3/8 x 1-1/2 Fender washers
(2) Keys for locking buckles
Cross reference number(s):35010389
Specs for Saddlemen Rigid-Mount Specific-Fit Quick-Disconnect Drifter Saddlebags - 3501-0389
|Type||Saddlebag - Specific Fit|
Fitment for Saddlemen Rigid-Mount Specific-Fit Quick-Disconnect Drifter Saddlebags - 3501-0389See if this part fits your ride
Part 507089 fits the following machines
- 2009 Honda VTX1300R
- 2008 Honda VTX1300R
- 2007 Honda VTX1300R
- 2006 Honda VTX1300R
- 2005 Honda VTX1300R
- 2007 Honda VTX1300S
- 2006 Honda VTX1300S
- 2005 Honda VTX1300S
- 2004 Honda VTX1300S
- 2003 Honda VTX1300S
- 2008 Honda VTX1800N
- 2007 Honda VTX1800N
- 2006 Honda VTX1800N
- 2005 Honda VTX1800N
- 2004 Honda VTX1800N
- 2007 Honda VTX1800R
- 2006 Honda VTX1800R
- 2005 Honda VTX1800R
- 2004 Honda VTX1800R
- 2003 Honda VTX1800R
- 2006 Honda VTX1800S
- 2005 Honda VTX1800S
- 2004 Honda VTX1800S
- 2003 Honda VTX1800S
I do have only two minor issues/complaints:
1) I would hope that the Saddlemen Co. would include a diagram or two in with the written instructions, which would probably help others, immensely.
2) The metal clip on the back of one of the bags, which attaches to the support bracket had a little to wide of tolerance/Gap. A little bend, and it fits snugly on the bracket now.
Someone mentioned in one of the reviews that I read, that the locks were inferior, to which I would agree.
Other than that, they're pretty darn nice!
So, if you're looking for a quality bag with removable potential, easy access, a specific fit, and easy installation, this might just be the saddlebag your looking for.
I know I was!
These may be more $$ than other brands, but worth it due to the inclusion of the mounting brackets. If you've never had bags on your machine, you will notice slight wind turbulance at highway speed, but quickly get use to this.
These will cover the side (stock) reflectors and helmet lock and not big enough to store a full or 1/2 face helmet.
These do not interfere with pass. foot pegs or pass. comfort, and were fairly easy to install despite the vague instructions (easier to install by trial and error than reading inst.) and took about 40 mins. Be sure to have your lock tight for threads on hand before install to save added time and re-assembly.
These definetly enhance the looks of my bike and recommend if going for more conservative look (not a fan of the studded look).