Overview of S&S Cycle T124 Long Block Black Engine - 310-0401
- No fuel system or ignition systems included
- Special head machining fits stock length intake manifolds (S&S manifold size 405)
- Stock style breathing system; compatible with stock and most performance air cleaners
- Same quality components and performance as the complete T-Series engines
- New cylinders look more like stock cylinders
- Includes Super Stock heads, T2 crankcase, high flow oil pump, cam cover and easy start gear drive cams
- Stock Twin Cam 96™ bolt pattern
- Displacement: 124"
- Bore: 4 1/8"
- Stroke: 4 5/8"
- 585 Cam
- Piston Type: S&S Forged Dished, 11cc
- Compression Ratio: 10.2:1
NOTE: REQUIRES OIL LINE KIT, PART NO. 4901491 AND TRANSMISSION DRILLING FIXTURE KIT PART NO. 284231
NOTE: Cylinder heads on these engines are specially machined to compensate for the non-stock cylinder length. As a result, they are compatible with manifolds and
throttle bodies with stock length intake runners. In addition, the breather vent bolt locations have been adjusted so they are in the stock location, so stock style aircleaner back plates will bolt up to these engines.
(1) Engine assembly
(1) 1/2 fl. oz.
(2) Spark plugs
5/8" Thread reach
1/2" Thread diameter
Projection insulator type
Solid/fixed terminal nut
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
Specs for S&S Cycle T124 Long Block Black Engine - 310-0401
|Color - Primary
Alternate/OEM Part Number(s):