S&S Cycle Forged Low Compression Piston Kit (.030") - 106-5498
- Forged "low compression" pistons for 74" stock motors with 3.4375" bore and 3.96875" stroke
- 8:1 compression ratio
- Deck height: 1.436"
- All piston kits come with two pistons, rings, wrist pins, and wrist pin keepers
- Compression ratios listed are approximate and are calculated using the correct length cylinders as specified by S&S
- Require the use of connecting rods with a rod length of 7.440" (standard length OEM #24281-74A connecting rods); use of earlier connecting rods with a rod length of 7.470" (OEM #24281-41A) will result in a slight increase in the compression ratio of about 1/2 point, and may also result in clearance problems (check all piston to cylinder head clearances carefully when using the early style rods)
- For Knuckleheads 41-47
NOTE: Using 80" pistons with 74" (3 31/32" stroke) flywheels will result in very low compression. Using 74" pistons with 80" (4 1/4" stroke) flywheels will result in contact between piston and cylinder head, and potential engine damage.
Alternate/OEM Part Number(s):