You May Also Be Interested In
Part #: 283919 Mfg Part #: RJ28041Other People Bought
NOTE: This project requires a skilled technician. It is the responsibility of the person assembling the parts to check all clearances and assembly specifications.
NOTE: For engines with cable controlled throttle bodies we recommend the S&S 58mm single bore throttle bodies and manifolds. For 2008-up touring models
NOTE: Main Bearing Note: S&S flywheel assemblies included in a 124" S&S Hot Set Up Kit® for 1999-'15 big twin engines are designed for use with Timken® sprocket shaft bearings. They will fit directly in all S&S crankcases for 07-15 Big Twin engines, with no modifications. However, stock 07-15 engines use a roller type bearing for the sprocket shaft, and will require modification.
NOTE: Due to the amount of power these engines produce with an S&S Hot Set Up Kit, S&S strongly recommends retrofitting 07-15 model crankcases to accept a Timken
NOTE: If you choose not to convert your crankcases to a Timken sprocket shaft bearing, S&S flywheels may be used in 07-15 engines with the installation of the Harley-
NOTE: NOT C.A.R.B. approved
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
|Type||Top End Kit w/Cylinder|
Part 1400290 fits the following machines