Need Assistance?
Legendary Service... Ask Your Friends - Since 1969
800.969.7501
Over 160K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

ROX Speed FX Clear Anodized 1 1/4 in. Pro-Offset Elite Block Risers for 7/8 in.-1 in. Handlebars - 3R-B12POE

  • Part #:
    599283
  • Manufacturer Part #:
    3R-B12POE

MSRP Price: $95.00

Our Price: $85.50

You Save:
$9.50 (10%)
1 on Hand

Overview of ROX Speed FX Clear Anodized 1 1/4 in. Pro-Offset Elite Block Risers for 7/8 in.-1 in. Handlebars - 3R-B12POE

  • Fits 7/8 in.-1 in. bars
  • Unique design allows for installation in either direction
  • 1 in. offset means bar can be moved closer or further away, depending on rider preference
  • Reducers lock into risers to ensure no slippage between components
  • Rox Pro-Offset risers have an oblong hole so that they will fit virtually any fore and aft bolt center-to-center distance with 8mm bolt threads
  • Including YFZ, Raptor, TRX, EX, KFX, LT-R, LTZ,DVX, KTM and more
  • These will not fit Polaris quads with out modifying the OEM stem
  • Made in the U.S.A.


NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models.

Included Items:
(2) Aluminum riser assemblies with 1 in. back and 1 1/4 in. rise and (4) 8mm-1.25 x 20mm socket head bolts
(4) 8mm-1.25 x 20mm socket head bolts
(4) Aluminum reducers
Instructions

Specs for ROX Speed FX Clear Anodized 1 1/4 in. Pro-Offset Elite Block Risers for 7/8 in.-1 in. Handlebars - 3R-B12POE

Color - Primary Silver
Diameter 1 in.
Diameter 7/8 in.
Rise 1 1/4 in.
Type Riser - Non-Pivoting
Units Each
Weight 0.70 lbs

Specs for ROX Speed FX Clear Anodized 1 1/4 in. Pro-Offset Elite Block Risers for 7/8 in.-1 in. Handlebars - 3R-B12POE

Color - Primary Silver
Diameter 1 in.
Diameter 7/8 in.
Rise 1 1/4 in.
Type Riser - Non-Pivoting
Units Each
Weight 0.70 lbs

Fitment for ROX Speed FX Clear Anodized 1 1/4 in. Pro-Offset Elite Block Risers for 7/8 in.-1 in. Handlebars - 3R-B12POE

See if this part fits your ride

Part 599283 fits the following machines

3.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
0
1
0
0
Fit
5.0 / 5
Quality
2.0 / 5
Style
5.0 / 5
Value
3.0 / 5
Fit
5 / 5
Quality
2 / 5
Style
5 / 5
Value
3 / 5
Size of item
I purchased this item by the specs that this item would fit my handlebars, however the chart says it will fit 7/8-1 1/8. These two sizes is what it fits, not 1 inch handlebars. Also while trying to mount them, one of the bolts striped out with very little tightening of the bolt by hand, I also had the same problem with an other product from Rox that striped a bolt by hand with a little Allen wrench with very little effort tightiening the bolt, I applied about four pounds of pressure with my hand and it stripped the one bolt. Same bolt location on both products, it could be a defect with the machine used to tap them out.
June 16, 2016
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Instructions and Manuals for ROX Speed FX Clear Anodized 1 1/4 in. Pro-Offset Elite Block Risers for 7/8 in.-1 in. Handlebars - 3R-B12POE