NOTE: For the BMW F800GS the front brake perch should be moved inboard on the handlebar 3/8 in. to relieve even more brake line and to insure proper function. When installing these risers pivoted up and back, it is also recommended to spin the OEM caps 180 degrees to make the final tightening bolt the forward bolt.
NOTE: Will not fit BMW R1200GS.
NOTE: Before installing riser, first determine if you have adequate brake line/cable length, and stem clamp clearance. Longer cables may be required when installing handlebar risers on some models.
|Clamping Diameter - Handlebars||1 1/8 in.|
|Rise||1 3/4 in.|
|Type||Riser - Pivoting|