You May Also Be Interested In
Part #: 03986 Mfg Part #: 505-205Possible Alternative
NOTE: Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.
NOTE: These wear rods replace the 2-stud 14-3/4 in. wear rods with a 3-stud 27-1/4 in. rod.
Length/Diameter: 27-1/4 in./7/16 in.
Stud Diameter/Length: 5/16 in./1-1/2 in.
Number of Studs: 3
Stud Center Mounting Distance From:
Front to 1st: 12-3/4 in.
1st to 2nd: 7 in.
2nd to 3rd: 7 in.
3rd to End: 1/2 in.
|Degree of Carbide||90 Degree|
|Length - Carbide||4 in.|
Part 031143 fits the following machines