• Roetin

Roetin Performance X-10 Two Carbide Wear Rods

  • Part #: 03554
  • Manufacturer Part #: X102118
This item is no longer available
03554
No Hassle Returns

Overview of Roetin Performance X-10 Two Carbide Wear Rods

  • Six inches of 90º carbide on 7/16 in. bar
  • Two carbide wear pads

NOTE: Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing

NOTE: For Arctic Cat EXT EFI Mtn. Cat, Thundercat Mtn. Cat and Wildcat Mtn. Cat fits models with deep lug track also referred to as Aggressive Wave track

Dimensions:
Length/Diameter: 30-1/2 in./7/16 in.
Stud Diameter/Length: 5/16 in./7/8 in.
Number of Studs: 4
Stud Center Mounting Distance From:
Front to 1st: 9-3/4 in.
1st to 2nd: 4-1/4 in.
2nd to 3rd: 9-3/4 in.
3rd to 4th: 6 in.
4th to End: 1/2 in.

Specs

Bar Diameter 7/16 in.
Stud Diameter 5/16 in.
Units Pair
Weight 2.18 lbs

Specs for Roetin Performance X-10 Two Carbide Wear Rods

Bar Diameter 7/16 in.
Stud Diameter 5/16 in.
Units Pair
Weight 2.18 lbs

Fitment for Roetin Performance X-10 Two Carbide Wear Rods

Part 03554 fits the following machines

See if this part fits your ride

Arctic Cat
1998 Arctic Cat Bearcat 340
1997 Arctic Cat Bearcat 340
1996 Arctic Cat Bearcat 340
1998 Arctic Cat Bearcat 440
1997 Arctic Cat Bearcat 440
1996 Arctic Cat Bearcat 440
1995 Arctic Cat Bearcat 440
1996 Arctic Cat Bearcat 550
1995 Arctic Cat Bearcat 550
1996 Arctic Cat Bearcat Wide Track
1992 Arctic Cat EXT 550 Special
1996 Arctic Cat EXT 580 EFI Mtn. Cat
1995 Arctic Cat EXT 580 EFI Mtn. Cat - Deep Lug
1993 Arctic Cat EXT 580Z
1994 Arctic Cat Jag 440 Z
1993 Arctic Cat Jag 440 Z
1992 Arctic Cat Jag Special
1992 Arctic Cat Prowler Special
1995 Arctic Cat Thundercat 900 Mtn. Cat - Deep Lug
1993 Arctic Cat Wildcat 700
1993 Arctic Cat Wildcat 700 EFI
1993 Arctic Cat Wildcat 700 EFI Mtn. Cat
1995 Arctic Cat Wildcat 700 EFI Mtn. Cat - Deep Lug
1996 Arctic Cat Z 440
1995 Arctic Cat Z 440
1994 Arctic Cat ZR 440
1993 Arctic Cat ZR 440
1996 Arctic Cat ZR 580
1995 Arctic Cat ZR 580
1994 Arctic Cat ZR 580
1993 Arctic Cat ZR 580
1996 Arctic Cat ZR 580 EFI
1995 Arctic Cat ZR 580 EFI
1995 Arctic Cat ZR 700
1994 Arctic Cat ZR 700

Reviews for Roetin Performance X-10 Two Carbide Wear Rods

out of 14 reviews.

10 out of 14 (71%) customers would recommend this to a friend.

5 Stars
6
4 Stars
4
3 Stars
1
2 Stars
0
1 Stars
3
Fit/Finish:
Value:
Quality:
Style:
Write a Review

Good purchase

March 19, 2013

Easy to install, confusing to order

I would recommend this item to a friend.
Fit/Finish:
Value:
Quality:
Style:
By: from Wisconsin

Was this review helpful to you?

Yes
No

Don't waste your money

February 18, 2013

In less than 300 miles, all I had left to these were the bolt studs! The complete rods and carbides were gone. I can't believe how badly they wore.hem replaced them with Woody's Doolys. Let's see how these last.

I wouldn't recommend this item to a friend.
Fit/Finish:
Value:
Quality:
Style:
By: from New York

Was this review helpful to you?

Yes
No

Price is right $$$$

June 26, 2011

These fit perfectly on my 2002 Mtn Max 600, can't wait for snow. I know they will perform on the trail.

I would recommend this item to a friend.
Durability:
Fitment:
Performance:
By: from Lakewood, CO

Was this review helpful to you?

Yes
No

CHEAP

April 3, 2011

Save yourself the hassle and buy Woody's. A piece of carbide fell out of the bar when I opened the package. I then proceded to install the other bars. Carbide pieces where falling everywhere. If you can't install them without them failing, what is going to happen on the trail. I tried to save some money and buy these instead of the Woody's that I usually use. What a mistake.

I wouldn't recommend this item to a friend.
Durability:
Fitment:
Performance:
By: from Buffalo, NY

Was this review helpful to you?

Yes
No

Not impressed at all.

March 16, 2011

There cheap wear rods. I bought them on for the last run of the winter. They were cheap and it shows. the trails were pretty beat up. And I'm not impressed with the chunks of carbide that Roetin uses. These carbides have 6 (1 inch) chunks in a row. And they weren't even all inline. The carbide wear pad on each end are recessed into the bar. Just not real impressed. I'll spend the extra money for Woody's next time. I thought that maybe they would have improved the quality since I used to by them when I was kid and couldn't afford anything better. Apparently I was wrong. I won't waste my money again on this brand.

I wouldn't recommend this item to a friend.
Durability:
Fitment:
Performance:
By: from Hugo, Mn

Was this review helpful to you?

Yes
No

Work fine

March 15, 2011

The wear rods installed easily. Be careful not to over tighten. I did and broke one of the bolts off the wear rod.

I would recommend this item to a friend.
Durability:
Fitment:
Performance:
By: from St. Cloud, MN

Was this review helpful to you?

Yes
No

Carbides

January 24, 2011

So far so good! I've got about 100 miles on them and they haven't shown any noticeable wear but they certainly can gouge a wood trailer! :)

I would recommend this item to a friend.
Durability:
Fitment:
Performance:
By: from St. Paul, MN

Was this review helpful to you?

Yes
No

January 5, 2011

I would recommend this item to a friend.
Durability:
Fitment:
Performance:
By:

Instructions and Media for Roetin Performance X-10 Two Carbide Wear Rods

360 Degree Image 360 Image-1 360° Image
360 Degree Image 360 Image-2 360° Image