Overview of Roetin Performance X-10 Two Carbide Wear Rods - X10KT464
- Six inches of 90° carbide on 7/16 in. bar
- Two carbide wear pads
- Hardweld filler, complete
- Set of four
Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.
4-Runner kit. 2 runners with 4 in. of carbide and 2 runners with 6 in. of carbide. Install longer carbides to outer side of skis
Control carbides are 90-degrees, the 4' carbides include 3" of carbide wear pads on the front, and the 6' have 2" of carbide wear pads. Neither has any hardweld filler.
Length/Diameter: 13-1/8 in./7/16 in.
Stud Diameter/Length: 5/16 in./2 in.
Number of Studs: 2
Stud Center Mounting Distance From:
Front to 1st: 3-1/2 in.
1st to 2nd: 6-1/2 in.
2nd to End: 3-1/8 in.
Specs for Roetin Performance X-10 Two Carbide Wear Rods - X10KT464
|Degree of Carbide
|Length - Carbide
||Set of 4
Alternate/OEM Part Number(s):