NOTE: Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.
NOTE: Wear rods replace the originals exactly on all models except those with EZ Steer either as original equipment or installed later. For those models, these wear rods replace both the plate and the 2-stud, 14-3/4 in. wear rod with a 3-stud, 17-3/8 in. design.
Note: Polaris Touring 600 HO FCI IQ 08/Touring IQ FS/FST 08 only requires one rod per ski
Length/Diameter: 17-3/8 in./1/2 in.
Stud Diameter/Length: 3/8 in./2 in.
Number of Studs: 3
Stud Center Mounting Distance From:
Front to 1st: 3 in.
1st to 2nd: 3-1/2 in.
2nd to 3rd: 7-1/8 in.
3rd to End: 3-1/2 in.
|Degree of Carbide||90 Degree|
|Length - Carbide||6 in.|
Part 031900 fits the following machines