• Roetin

Roetin Performance X-10 Two Carbide Wear Rods

  • Part #: 031139
  • Manufacturer Part #: X102632
This item is no longer available
031139
No Hassle Returns

Overview of Roetin Performance X-10 Two Carbide Wear Rods

  • Six inches of 90º carbide on 7/16 in. bar
  • Includes 6 in. center carbide, two 1 in. carbide wear pads - one on front and rear with hardweld filler in between
  • Includes eight nyloc nuts

NOTE: Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.

Dimensions:
Length/Diameter: 17 in./7/16 in.
Stud Diameter/Length: 5/16 in./1 in.
Number of Studs: 4
Stud Center Mounting Distance From:
Front to 1st: 3/4 in.
1st to 2nd: 3-3/4 in.
2nd to 3rd: 6-7/8 in.
3rd to 4th: 2-7/8 in.
4th to End: 2-3/4 in.

Specs

Bar Diameter 7/16 in.
Stud Diameter 5/16 in.
Units Pair
Weight 1.93 lbs

Specs for Roetin Performance X-10 Two Carbide Wear Rods

Bar Diameter 7/16 in.
Stud Diameter 5/16 in.
Units Pair
Weight 1.93 lbs

Fitment for Roetin Performance X-10 Two Carbide Wear Rods

Part 031139 fits the following machines

See if this part fits your ride

Yamaha
1997 Yamaha Mountain Max 600
1997 Yamaha Mountain Max 700
1999 Yamaha V-Max 500
2000 Yamaha V-Max 500 Deluxe
1999 Yamaha V-Max 500 Deluxe
1998 Yamaha V-Max 500 XT
1997 Yamaha V-Max 500 XT
1998 Yamaha V-Max 500 XTC
1997 Yamaha V-Max 500 XTC
1998 Yamaha V-Max 500 XTC Deluxe
1997 Yamaha V-Max 500 XTCE
1997 Yamaha V-Max 500 XTCR
1998 Yamaha V-Max 500 XTR
1999 Yamaha V-Max 600
2000 Yamaha V-Max 600 Deluxe
1999 Yamaha V-Max 600 Deluxe
1998 Yamaha V-Max 600 SX
1997 Yamaha V-Max 600 SX
1998 Yamaha V-Max 600 SX w/Ohlins
1998 Yamaha V-Max 600 XT
1997 Yamaha V-Max 600 XT
1998 Yamaha V-Max 600 XTC
1997 Yamaha V-Max 600 XTC
1998 Yamaha V-Max 600 XTC Deluxe
1997 Yamaha V-Max 600 XTCE
1997 Yamaha V-Max 600 XTCR
1998 Yamaha V-Max 600 XTR
1999 Yamaha V-Max 700
2000 Yamaha V-Max 700 Deluxe
1999 Yamaha V-Max 700 Deluxe
1998 Yamaha V-Max 700 SX
1997 Yamaha V-Max 700 SX
1998 Yamaha V-Max 700 SX w/Ohlins
1998 Yamaha V-Max 700 XT
1998 Yamaha V-Max 700 XTC
1998 Yamaha V-Max 700 XTC Deluxe
1999 Yamaha Venture 500
1998 Yamaha Venture 500
1997 Yamaha Venture 500
1999 Yamaha Venture 600
1998 Yamaha Venture 600
1997 Yamaha Venture 600
1999 Yamaha Venture 700
1998 Yamaha Venture 700

Reviews for Roetin Performance X-10 Two Carbide Wear Rods

out of 14 reviews.

10 out of 14 (71%) customers would recommend this to a friend.

5 Stars
6
4 Stars
4
3 Stars
1
2 Stars
0
1 Stars
3
Fit/Finish:
Value:
Quality:
Style:
Write a Review

Good purchase

March 19, 2013

Easy to install, confusing to order

I would recommend this item to a friend.
Fit/Finish:
Value:
Quality:
Style:
By: from Wisconsin

Was this review helpful to you?

Yes
No

Don't waste your money

February 18, 2013

In less than 300 miles, all I had left to these were the bolt studs! The complete rods and carbides were gone. I can't believe how badly they wore.hem replaced them with Woody's Doolys. Let's see how these last.

I wouldn't recommend this item to a friend.
Fit/Finish:
Value:
Quality:
Style:
By: from New York

Was this review helpful to you?

Yes
No

Price is right $$$$

June 26, 2011

These fit perfectly on my 2002 Mtn Max 600, can't wait for snow. I know they will perform on the trail.

I would recommend this item to a friend.
Durability:
Fitment:
Performance:
By: from Lakewood, CO

Was this review helpful to you?

Yes
No

CHEAP

April 3, 2011

Save yourself the hassle and buy Woody's. A piece of carbide fell out of the bar when I opened the package. I then proceded to install the other bars. Carbide pieces where falling everywhere. If you can't install them without them failing, what is going to happen on the trail. I tried to save some money and buy these instead of the Woody's that I usually use. What a mistake.

I wouldn't recommend this item to a friend.
Durability:
Fitment:
Performance:
By: from Buffalo, NY

Was this review helpful to you?

Yes
No

Not impressed at all.

March 16, 2011

There cheap wear rods. I bought them on for the last run of the winter. They were cheap and it shows. the trails were pretty beat up. And I'm not impressed with the chunks of carbide that Roetin uses. These carbides have 6 (1 inch) chunks in a row. And they weren't even all inline. The carbide wear pad on each end are recessed into the bar. Just not real impressed. I'll spend the extra money for Woody's next time. I thought that maybe they would have improved the quality since I used to by them when I was kid and couldn't afford anything better. Apparently I was wrong. I won't waste my money again on this brand.

I wouldn't recommend this item to a friend.
Durability:
Fitment:
Performance:
By: from Hugo, Mn

Was this review helpful to you?

Yes
No

Work fine

March 15, 2011

The wear rods installed easily. Be careful not to over tighten. I did and broke one of the bolts off the wear rod.

I would recommend this item to a friend.
Durability:
Fitment:
Performance:
By: from St. Cloud, MN

Was this review helpful to you?

Yes
No

Carbides

January 24, 2011

So far so good! I've got about 100 miles on them and they haven't shown any noticeable wear but they certainly can gouge a wood trailer! :)

I would recommend this item to a friend.
Durability:
Fitment:
Performance:
By: from St. Paul, MN

Was this review helpful to you?

Yes
No

January 5, 2011

I would recommend this item to a friend.
Durability:
Fitment:
Performance:
By:

Instructions and Media for Roetin Performance X-10 Two Carbide Wear Rods

360 Degree Image 360 Image-1 360° Image
360 Degree Image 360 Image-2 360° Image