You May Also Be Interested In
Part #: 03992 Mfg Part #: 507-205Possible Alternative
NOTE: Some models require drilling extra hole(s) in skis to mount carbides. Dennis Kirk recommends removing any paint from the studs before use by wire-brushing.
NOTE: Some of the models listed have EZ Steer as original equipment, which is retained with the installation of any X-10 One or X-PR One carbides. If you wish to eliminate the original plate and 2-stud, 14-3/4 in. wear rods you may replace them with an X-10 One or X-PR One 3-stud, 27-1/4 in. type.
NOTE: Will not work on 2002 models with dual rods on one ski.
Length/Diameter: 27-1/4 in./1/2 in.
Stud Diameter/Length: 3/8 in./1-1/2 in.
Number of Studs: 3
Stud Center Mounting Distance From:
Front to 1st: 12-3/4 in.
1st to 2nd: 7 in.
2nd to 3rd: 7 in.
3rd to End: 1/2 in.
|Degree of Carbide||60 Degree|
|Length||7 1/4 in.|
Part 031147 fits the following machines