NOTE:
2014 and newer Indian Chief Classic, Chief Vintage, Chieftain, Dark Horse, and Roadmaster models use a four-wire CAN-bus low-voltage computer controlled wiring system. Therefore, when wiring a trailer to these models, it is required to install 51-9238 CAN-bus module. The steps below outline the components needed to wire a trailer hitch to the 2014-newer Indian models: 1.) The first component you will need is the 51-9237 sub-harness. 2.) Next, you will need the 51-9238 to convert the CAN-bus signal. 3.) If your trailer uses a five-wire system, move on to step 4. If your trailer uses a four-wire system, you will need an EC07664 five-to-four wire converter. 4.) All models require the use of our 51-8190 Trailer Wiring Isolator Included Items: (1) Wire isolator (1) Power cord w/fuse 12" long (1) Adhesive pad (4) Snap connectors (4) Posi tap connectors (2) Cable ties |
Mfg #: | GL18007-IU |
---|---|
Part #: | 518190 |
Type | Wire Harness |
Units | Each |
Weight | 0.75 lbs |
Wiring - Hitch | Wiring Isolator |
Part 518190 fits the following machines