Overview of Risk Racing Junior Lock-N-Load Strapless Motocross Transport System - 00204
The “Lock-N-Load” Moto Transport System securely holds your motocross bike in your trailer without the use of tie-down straps, floor anchors or wheel chocks. It takes an enormous amount of pressure off of the fork seals during transit, and it frees up valuable space allowing the transport of more motorcycles or gear. Additionally, the Lock-N-Load can quickly be removed from the trailer floor by unscrewing the 4 thumb screws leaving only the low profile mounting plates. Each plate has a “D” ring for additional anchor points on your trailer floor.
Risk Racing Lock-N-Load Motocross Transport System. No More Motorcycle Tie-Downs
To operate the Lock-N-Load, rotate the knobs into the lock position and simply roll or ride your bike into the trailer until your foot pegs hit the open jaws of the Lock-N-Load. Then step on the upper jaws and they will automatically lock into place. To release your bike, simply rotate the knobs into the release position and step on the top jaws. This will automatically release the jaws and free your motorcycle. For additional safety, insert the attached locking pins prior to transport. You can replace the locking pins with pad locks for added security and a theft deterrent.
The Lock-N-Load JUNIOR is designed to fit 85cc MX specific bikes, or bikes with similar size and weight characteristics. 2-stroke 250cc bikes or larger with large exhaust can often be loaded backwards.
(1) 18"-20" wide x 12-1/2"-14-3/4" tall Black steel MX Lock-N-Load transport assembly
(2) Black steel mounting plates
(4) Red top thumb screws
(4) 8mm-1.25 x 40mm Hex head bolts
(4) 8mm-1.25 Hex nuts
(4) 8mm Flat washers
(4) 8mm Split lock washers
Specs for Risk Racing Junior Lock-N-Load Strapless Motocross Transport System - 00204
Alternate/OEM Part Number(s):