Dennis Kirk Inc.
Legendary Service... Ask Your Friends - Since 1969
Need Assistance?
Over 150K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Ricks Motorsport Electrics Stator - 21-101

  • Part #: 21329
  • Manufacturer Part #: 21-101
Our Price: $139.95
3 on Hand

Overview of Ricks Motorsport Electrics Stator - 21-101

  • Stators are heavy-duty three-phase; direct plug-in and come complete with all rubbers and OEM-style plug end

Specs for Ricks Motorsport Electrics Stator - 21-101

Type - Charging Stator
Units Each
Weight 2.10 lbs

Specs for Ricks Motorsport Electrics Stator - 21-101

Type - Charging Stator
Units Each
Weight 2.10 lbs

Fitment for Ricks Motorsport Electrics Stator - 21-101

See if this part fits your ride

Part 21329 fits the following machines

Honda
  • 1983 Honda CB1000C Custom
  • 1983 Honda CB1100F
  • 1982 Honda CB750C Custom
  • 1981 Honda CB750C Custom
  • 1980 Honda CB750C Custom
  • 1982 Honda CB750F Super Sport
  • 1981 Honda CB750F Super Sport
  • 1980 Honda CB750F Super Sport
  • 1979 Honda CB750F Super Sport
  • 1982 Honda CB750K
  • 1981 Honda CB750K
  • 1980 Honda CB750K
  • 1979 Honda CB750K
  • 1983 Honda CB750SC Nighthawk
  • 1982 Honda CB750SC Nighthawk
  • 1982 Honda CB900C Custom
  • 1981 Honda CB900C Custom
  • 1980 Honda CB900C Custom

Stator - 21-303

4 out of 35 reviews
FitFinish:
Value:
Quality:
Style:


Great Buy

Good price and quality, all went well....REMEMBER to buy a stator cover gasket and starter cover gasket, I used silicone sealant but created a problem, must be a clearance problem because motor would not turn over unless I loosened starter cover a little bit, so,,orderd stator cover and starter cover gasket and did it again,,,was ok then......

Review By:

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

Worked well. Tight fit.

We installed the matching rotor, stator, brushes and rectifier in out 82 Honda cb900 It was recommended to us to replace all components with the age of the bike and it not charging properly. After replacing all components with parts from Dennis Kirk which were made by ricks electric the bike would still not charge. It turned out to be a bad out of the box rectifier because when we plugged the old one back in it charged the system just fine. 6 months down the road and not too many miles the contact surface on the rotor flaked apart and ate the brushes which destroyed the rest of the charging system and required the entire charging system be replaced once again to the tune of $450(ish) So I'm not very happy with the quality of some of these aftermarket parts. Other than that the stator never gave us issues besides a very snug fit.

Review By:

from Minnesota

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

Dead on arrival

I ordered this for a 1996 Yamaha Virago. When it arrived it only worked on two phases therefore it would not charge the battery. The wire placement on the stator was not in the right place compared to the OEM one. No terminals on neutral safety switch wire. Picture is misleading.

Review By:

from Alabama

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

Great product

I have ordered many items, many times from Dennis Kirk. Once again they came thru as always. The outer stator fit just like OEM but looks heavier duty than OEM. Once the bike was put back together, the stator was working perfectly.

Review By:

from Miami, Florida

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

Good price

Don't know if its me or the bike?? This will be the 3rd stator. First one lasted 2 years? 2nd one lasted 2 MO. Took trip to TX. from PA. Got back from trip & a week later & its just about charging, driving around durring the day with the parking light fuse pull. I replace the reg. with the first stator, stator is all burn up when I took it out.. Just wish I didn't have to pull the engine out to replace it...

Review By:

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

decent product

Shipping was fast and packaged good. When installing, a hole to screw in a bracket on the stator was threaded on the wrong side so i had to tap it. Other than that great product. Old stator measured 12.1V and new 14.3V.

Review By:

from jax, fl

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

Worthwhile upgrade

Had smaller gauge wires with inferior insulation on 84' V65 Magna. This was in no brainer purchase. Better quality, and half the price of OEM. No issues.

Review By:

from Liberty Twp. OH

Was this review helpful to you?


Fit/Finish:
Value:
Quality:
Style:

I ordered this stator from D K for over half off the dealer price, I do my own wrenching to save more cash so Im very pleased when all the parts match right up with no surprises

Review By:

from Houston, Texas

Was this review helpful to you?


Instructions and Manuals for Ricks Motorsport Electrics Stator - 21-101

You May Also Be Interested In