Ricks Motorsport Electrics Hot Shot Series CDI Box - 15-601
Box has the original ignition curve and will rev 1000 RPM over redline
Enhance overall performance when installing a high-flow jet kit
Mounts in stock location using stock hardware and connectors
Can also be used to replace defective CDI box on stock machines
NOTES: The only way to test your CDI box is to swap it out with another known good unit from the same make/model/year machine. Check all ignition components and connections to ensure they are within tolerances. If some components are out of spec they should be replaced as they can cause premature failure. Because of this we recommend you rule everything else out before replacing the CDI box.
This CDI box is sold without a manufacturer's warranty. The manufacture has pre-tested it to ensure it functions properly