Dennis Kirk Inc.
Legendary Service... Ask Your Friends - Since 1969
Need Assistance?
Over 150K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Saddlemen Replacement Seat Cover - H620

  • Part #: 61740
  • Manufacturer Part #: H620
Our Price: $72.00
1 on Hand

Overview of Saddlemen Replacement Seat Cover - H620

  • Replace duct-tape patches and unsightly tears on your old seat for an economical price
  • Covers match original manufacturers fit and design and restore seats to better-than-new condition
  • Special weather-resistant, low-temperature vinyl stands up to years of harsh weather and rough riding conditions
  • Installation instructions included

Specs for Saddlemen Replacement Seat Cover - H620

Color - Primary Black
Color - Seat Black
Type - Seat Covers Seat Cover
Units Each
Weight 1.75 lbs

Specs for Saddlemen Replacement Seat Cover - H620

Color - Primary Black
Color - Seat Black
Type - Seat Covers Seat Cover
Units Each
Weight 1.75 lbs

Fitment for Saddlemen Replacement Seat Cover - H620

See if this part fits your ride

Part 61740 fits the following machines

Honda
  • 1979 Honda GL1000 Gold Wing
  • 1978 Honda GL1000 Gold Wing
  • 1977 Honda GL1000 Gold Wing
4.5 / 5.0
34 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
25
4
3
1
1
Fit
4.3 / 5
Quality
4.5 / 5
Style
4.6 / 5
Value
4.5 / 5
Fit
4 / 5
Quality
4 / 5
Style
5 / 5
Value
5 / 5
Like a new seat
I ordered a Saddleman seat cover for my 1981 Kz1000 LTD and it shipped the next day, arriving just a few days later. The cover looked better than I expected. I removed what was left of the old seat cover and, following the instruction sheet, pried out the metal teeth around the inside of the seat pan, that held the seat cover on.
Using a very sharp carving knife, I trimmed the foam seat pad. The LTD seat has a pronounced step from the rider to the passenger seat and I trimmed the step back about an inch and slightly increased the angle of the step. This had the effect of allowing a bit more leg room on the bike and feels like better low back support.
The seat cover fit on over the original foam with no problem, and after my trim job on the foam, the lower seam, of the step area of the pad, fell perfectly into place along the curved base of the step.
Cosmetically, it is a one hundred percent improvement in the appearance of the bike.
A friend had stopped by on his bike, just as I was preparing to install the cover and he commented how great it was to see something that could make such a difference, come out of the box and go right on like that!
Thanks guys!
April 29, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
cx500 custom 1981
Very nice fit, look and feel is better than original!
December 21, 2009
Fit
1 / 5
Quality
3 / 5
Style
2 / 5
Value
1 / 5
Saddlemen CB650SC replacement seat cover
So far I'm not impressed.

I've fitted several seat covers before and had not issues.

This cover is not cut right - the lower section of the seat driver is "WAY" to big such that it would take 1" of foam to take up the slop. To validate I took it to two upohlstery shops and they said the same thing, and confirmed the original foam is perfect - no settling, sagging (i.e. apart from a small seam separation the original cover fit perfect and looked really good).

The material texture is not as nice as the original.

As for durability - the seams are not reinforced with a double sewn layer of material covering the seam on the inside. The threads were allready starting to pull through on the install process. The seat cover is also about 1" to short which causes the front to crunch shorter and it doesn't intersect the tank properly like it original.

I called Saddlemens and they agreed to install the cover if I pay shipping. Ok good - but I still will be out $40 shipping, downtime, and a big hassle.

Let's wait and see - maybe they make it right after they recieve it - I'll give them the benefit of the doubt.

Update coming.
January 21, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
SaddleSkins Seat cover - 77 XS650
Great product at a great price through DK ! I really like how easy it is to install the seat cover on my 77 Yamaha XS650 seat. Also installed a seat cover of the same brand on my 79 XS650 several years ago & it is still in great condition.
Thanks DK !
January 22, 2011
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
very good quality for the money
I installed this on my 1981 yamaha maxim.fit very nice ,takes some elbow grease to install but the finished product is worth it.
April 23, 2010
Fit
4 / 5
Quality
5 / 5
Style
5 / 5
Value
4 / 5
Overall Very Good
My cover looks great. The installation was a little testing but that was partly due to the condition of my seat pan hooks and how tight the cover needed to be stretched. All in all though, not too tough. One problem I did note was that that the hole and grommet at the rear of the seat was too small for my lock cylinder to protrude through. I had to enlarge the hole and reuse my OEM grommet. My bike (Suzuki GS 1100GL) has a lock in the rear to take the seat off.
August 10, 2010
Fit
2 / 5
Quality
3 / 5
Style
4 / 5
Value
4 / 5
Its okay
I like the look of the seat cover. I got this for my 1996 nighthawk CB750.

It came with a draw string. No way it could be installed with that and you wouldn't want to. You will want to staple it like the original was done. You will also want to remove the original cover. Oh, and your staple gun from the home center will not work. Even the best one (arrow t-50) cant drive staples into the hard plastic. You will need to find someone with a pneumatic upholstery stapler.

I found a guy who does furniture repairs for a local furniture store. he did it in exchange for a case of beer.

The cover was a very tight fit. It seems the seams are stretched too tight and could pull apart. It took two of us to stretch it into the correct position. I'm afraid the seams may pull apart eventually. I have only about 50 miles of riding on the new seat and so far so good.

I like the way it looks. No wrinkles, nice texture.
March 17, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Great cover
Bought this for an 82 Kaw 440 LTD , fit great and looks good as factory. Second Saddlemen seat cover I have bought for different cycles and really like how fit and last. Excellent choice to recover your seat yourself!
March 12, 2011
Fit
5 / 5
Quality
4 / 5
Style
4 / 5
Value
4 / 5
Replacement Seat Covers
They go on very easily if you can heat them up a bit. I put them in front of a utility space heater for a bout a minute on each side. This made them nice and stretchable. Fit right over the old covers and had to do very little stapeling on the underside to tighten. My 1986 Honda Shadow VT1100C is rockin like never before. Very close replicas to the original.
June 10, 2011
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
good as new
appearance as close to the original seat as possible in a more flexible tougher material. Should be the last cover this seat will ever need.
October 23, 2009

Instructions and Manuals for Saddlemen Replacement Seat Cover - H620

You May Also Be Interested In