Designed to hold a large number of cell phones and electronic devices
Comes with three sets of four flexible rubber coated fingers placed along the sides to grip your device
The fingers open by squeezing the ends to open the small finger arms
The bottom of the holder includes a back plate that adds support to the device being held by the mount
The perfect solution that is the best phone mount, car mount and motorcycle mount; can also be used with several other phone accessories including Samsung and LG
The spine plate contains the universal AMPS and 1.5 in. x 2 in. hole patterns
This mount is designed to hold cell phones (check measurements below for dimensions), 2-way radios and GPS devices
Works with OtterBox (Defender, Commuter, Impact) Cases, phones with bumper, and twisted metal case
Height dimensions: minimum with top and bottom plates is 5.25 in. and maximum with top and bottom plates is 6.0 in.
The top and bottom plates can be removed for larger devices
Spine plate dimensions: 3 in. W x 3 in. H
Using short arm side clamps: maximum depth is 0.75 in., minimum width is 1.25 in. and maximum width is 3.0 in.
Using medium arm side clamps: maximum depth is 1.25 in., minimum width is 1.5 in. and maximum width is 3.5 in.
Using long arm side clamps: maximum depth is 1.6 in., minimum width is 2.25 in. and maximum width is 3.5 in.
NOTE:Does not come with ball mount adapter, use PART #59-9220 to mount to Ram double socket arm
What to order: 1. Ram Mount Universal Base 2. Ram Mount Arm 3. Ram Mount Adapter
Included Items: (1) 5 in. x 2 1/2 in. black composite back plate (2) Black composite supports (one top, one bottom) (4) Blck composite finger grips (SA1) (4) Black composite grips (SA2) (4) Black composite finger grips (SA3) (4) Black vinyl end caps (6) #8-32 x 3/8 in. pan head screws (2) #8-32 x 5/8 in. pan head screws (2) #8-32 x 3/4 in. pan head screws (8) #8-32 nyloc nuts Instructions