Kits include all necessary components to repair carburetor; models with two carburetors include components to repair both carburetors
OEM jet sizes are included in the kit
NBR rubber material used on all O-rings and rubber gaskets
High-performance interface gasket material for all paper gasket applications
components included in the kits are based off of US models and discretion must be used when attempting to install the kit on a non-US model
Includes all O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat
(1) Jet needle
(1) Pilot screw
(1) Needle and seat
(1) Flat washer
(1) Float chamber o-ring
(4) 4mm-0.70 x 18m Pan head bolt
(4) 4mm-0.70 x 14mm Pan head bolt
(1) Small screw
(1) #141.5 Main jet
(1) #42.5 Pilot jet
(1) #80 Jet
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
This was my first attempt at a carburator rebuild.. This kit had all the parts.needed to make it like new. I used a diagram found on the Internet and watched a couple Utube videos. My ATV started right up and has been running perfectly. This site has most everything and the price was right.
This kit did it's job, although the small o-rings were a little oversized and my kit was missing the spring that was pictured. I just used the old one. Definitely contains everything pictured and what you will need to rebuild your carburetor. Crazy fast shipping too!