Steel muffler with black finish can be directly installed on OEM pipes with its special coupler - no gaskets needed!
Galvanized main tube
All internal parts are fully welded
All built with spark arrestor
As quiet as the OEM silencer
One-year manufacturer's warranty
Made in North America
California law generally prohibits the sale and installation of aftermarket exhaust products UNLESS such products are installed on vehicles that did not come originally equipped with catalytic converters or are used only for racing and are never used upon a California highway.
(1) Black steel ATV Slip-On muffler
(1) Black steel spark arrestor
(1) 1/4"-20 x 1/2" Socket cap head bolt
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California.
The muffler is not a slip on, You have to cut the old muffler at the weld area where the pipe and the muffler join together. Then you have to press the pipe you cut off the old muffler into the new muffler. Make sure the amount you cut off is just right so the new muffler lines up with the mounts on the frame. After that is all done the new muffler sounds like a stock muffler.