Dennis Kirk Inc.
Search Within
Ride Search
Top 3 Product Matches

PowerMadd Powerriser 475 Pivoting 2 in. Riser for 7/8 in. - 1 1/8 in. bars - 45431

  • Part #:
    596098
  • Manufacturer Part #:
    45431

MSRP Price: $74.95

Our Price: $67.46

You Save $7.49 (10%)
loading...
Ships Today! If ordered in:
0 8 HR : 4 7 MIN : 0 1 SEC
Overview of PowerMadd Powerriser 475 Pivoting 2 in. Riser for 7/8 in. - 1 1/8 in. bars - 45431
For 7/8 in. clamps to 1 1/8 in. bars

  • Solid aluminum construction with a strong one-piece design
  • Dual pivot points provide ability to adjust handlebar position front-to-back and rotated up or down
  • Fit 7/8 in. bar clamps on motorcycles and ATVs that have a 4.75 in. wide top post
  • Check available cable slack to make sure existing cables will work with the riser
  • Available in 2 in. and 3 in. heights
  • Available for 7/8 in. bar clamp using 7/8 in. standard bars and for 7/8 in. bar clamp using oversized 1 1/8 in. bars

NOTE: Handlebar clamp must be purchased separately if the stock lower or upper handlebar clamp is one piece (part No. 596094)

Specs for PowerMadd Powerriser 475 Pivoting 2 in. Riser for 7/8 in. - 1 1/8 in. bars - 45431

Clamping Diameter - Handlebars 1 1/8 in.
Clamping Diameter - Handlebars 7/8 in.
Color - Primary Black
Rise 2 in.
Type Riser - Pivoting
Units Each
Weight 1.30 lbs

Alternate/OEM Part Number(s):

06020245

UPC Code:

112569154312 612569454318
Specs for PowerMadd Powerriser 475 Pivoting 2 in. Riser for 7/8 in. - 1 1/8 in. bars - 45431
Clamping Diameter - Handlebars 1 1/8 in.
Clamping Diameter - Handlebars 7/8 in.
Color - Primary Black
Rise 2 in.
Type Riser - Pivoting
Units Each
Weight 1.30 lbs
Fitment for PowerMadd Powerriser 475 Pivoting 2 in. Riser for 7/8 in. - 1 1/8 in. bars - 45431
See if this part fits your ride

Part 596098 fits the following machines

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Fit
5.0 / 5
Quality
5.0 / 5
Style
5.0 / 5
Value
5.0 / 5
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Powermadd Bar Riser
These Bar risers are surprisingly well-made!! Excellent machining and manufacture. Powdercoat or other coating appears very durable and nicely applied.

This "all-in-one-piece" design prevents separate bar risers from torque-ing under severe loads)e.g., picking up a "down" bike using the handlebars).

Of course, this design allows the rider to choose an infinite variety of "up" and "back."

Powermadd's whole series of products seem to be particularly well thought out.
I used my bar risers to bring the bars back and a little "up" on my 1999 Triumph Thunderbird 900 with the looong gas tank.
May 29, 2015
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Instructions and Manuals for PowerMadd Powerriser 475 Pivoting 2 in. Riser for 7/8 in. - 1 1/8 in. bars - 45431