Dennis Kirk Inc.
Legendary Service... Ask Your Friends - Since 1969
Need Assistance?
Over 150K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

PowerMadd Powerriser 475 Pivoting 2 in. Riser for 7/8 in. Clamps to 7/8 in. bars - 45430

  • Part #: 596097
  • Manufacturer Part #: 45430

MSRP Price: $70.00

Our Price: $59.50

You Save:
$10.50 (15%)
2 on Hand

Ships Today!
If ordered in:

1 9 : 1 5 : 3 2
  • HOUR
  • MIN
  • SEC

Overview of PowerMadd Powerriser 475 Pivoting 2 in. Riser for 7/8 in. Clamps to 7/8 in. bars - 45430

For 7/8 in. clamps to 7/8 in. bars

  • Solid aluminum construction with a strong one-piece design
  • Dual pivot points provide ability to adjust handlebar position front-to-back and rotated up or down
  • Fit 7/8 in. bar clamps on motorcycles and ATVs that have a 4.75 in. wide top post
  • Check available cable slack to make sure existing cables will work with the riser
  • Available in 2 in. and 3 in. heights
  • Available for 7/8 in. bar clamp using 7/8 in. standard bars and for 7/8 in. bar clamp using oversized 1 1/8 in. bars
    NOTE: Handlebar clamp must be purchased separately if the stock lower or upper handlebar clamp is one piece (part No. 596094)

Specs for PowerMadd Powerriser 475 Pivoting 2 in. Riser for 7/8 in. Clamps to 7/8 in. bars - 45430

Color - Primary Black
Diameter 7/8 in.
Rise 2 in.
Type - Handlebar Risers Riser - Pivoting
Units Each
Weight 1.40 lbs

Specs for PowerMadd Powerriser 475 Pivoting 2 in. Riser for 7/8 in. Clamps to 7/8 in. bars - 45430

Color - Primary Black
Diameter 7/8 in.
Rise 2 in.
Type - Handlebar Risers Riser - Pivoting
Units Each
Weight 1.40 lbs

Fitment for PowerMadd Powerriser 475 Pivoting 2 in. Riser for 7/8 in. Clamps to 7/8 in. bars - 45430

See if this part fits your ride

Part 596097 fits the following machines

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Fit
5.0 / 5
Quality
5.0 / 5
Style
5.0 / 5
Value
5.0 / 5
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Powermadd Bar Riser
These Bar risers are surprisingly well-made!! Excellent machining and manufacture. Powdercoat or other coating appears very durable and nicely applied.

This "all-in-one-piece" design prevents separate bar risers from torque-ing under severe loads)e.g., picking up a "down" bike using the handlebars).

Of course, this design allows the rider to choose an infinite variety of "up" and "back."

Powermadd's whole series of products seem to be particularly well thought out.
I used my bar risers to bring the bars back and a little "up" on my 1999 Triumph Thunderbird 900 with the looong gas tank.
May 29, 2015

Instructions and Manuals for PowerMadd Powerriser 475 Pivoting 2 in. Riser for 7/8 in. Clamps to 7/8 in. bars - 45430