I installed this on a 1994 XCR 440 and it did not fit. The fittings were wrong for my machine. I had to run all over to get the right fittings. The fittings on the hose are JIC. There are 3 adapters one to 1/8" pipe thread and the other two to a 45 degree flare (Brake line fitting). I needed 2- 1/8" pipe fittings. I called in and all of the other extended brake lines are the same. I ended up adapting the 45 degree flare to 1/8" pipe.
The product is good just be prepared to go searching for fittings.
Great fit. Master cylinder side is 7/16" brake caliper side is 1/2" comes with extra 1/2" adapter. Didn't realize that at first. Fit perfect for my powermadd 2" riser with no other modification to sled.
The description for this replacement break line indicated that it is 7 inches longer than the factory one on my 96 Polaris Ultra. it was actually the same length but does not have the ridged section which allowed me to take a different path and it worked out very well 6 inches of bar riser.