Dennis Kirk Inc.
Legendary Service... Ask Your Friends - Since 1969
Need Assistance?
Over 150K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Vance & Hines Power Duals Head Pipes - 16759

  • Part #: 4404140
  • Manufacturer Part #: 16759
This item is no longer available

Overview of Vance & Hines Power Duals Head Pipes - 16759

  • Power Duals is the ticket to style, quality and performance
  • More than just individual head pipes, Power Duals integrates an exclusive Vance & Hines Power Chamber hidden behind a contoured heat shield that generates more horsepower and torque than stock
  • This new right side design eliminates the heat issues on the left side for the passenger, routing hot exhaust gases below the footpeg and protecting vital engine components and side covers from heat damage
  • Allows the use of any 09 OEM style mufflers
  • Made in the U.S.A.

    Included Items:
    (2) Mounting brackets
    (1) Header assembly
    (1) Front heat shield
    (1) Rear heat shield
    (1) 90 Deg. heat shield
    (1) Straight heat shield
    (1) Collector heat shield
    (1) Crosspipe header assembly
    (1) Crosspipe heat shield
    (2) #24 Hose clamps
    (12) #20 Hose clamps
    (1) Torca band clamp
    (1) Nylon cable tie
    (2) Exhaust gaskets
    (1) 3/8-16 x 3 in. Socket head cap screw
    (2) Dogbone nut plates
    (2) 1 x 3/16 in. Washers
    (1) 3/8 in. Lock washer
    (4) 5/16 in. Flange head bolts

    Note: Will also fit FLHTCUTG 09 (trike) if adapter kit 44-05604 is used


Note: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information

Note: Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. Please consult the manufacturer directly with questions regarding any modifications that may need to be made during, or after installing their product. If a jet kit or EFI controller is recommended please see the Intake/Fuel section for products available

Note: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing. See the CHEM/LUBES category for products that will help prevent or remove blueing.

Specs for Vance & Hines Power Duals Head Pipes - 16759

Finish Chrome
Type - Exhaust - Head Pipes & Mid Pipes Head Pipe
Units Set
Weight 25.95 lbs

Specs for Vance & Hines Power Duals Head Pipes - 16759

Finish Chrome
Type - Exhaust - Head Pipes & Mid Pipes Head Pipe
Units Set
Weight 25.95 lbs

Fitment for Vance & Hines Power Duals Head Pipes - 16759

See if this part fits your ride

Part 4404140 fits the following machines

Harley-Davidson
  • 2009 Harley-Davidson Electra Glide Classic - FLHTC
  • 2009 Harley-Davidson Electra Glide Standard - FLHT
  • 2009 Harley-Davidson Electra Glide Ultra Classic - FLHTCU
  • 2009 Harley-Davidson Road Glide - FLTR
  • 2009 Harley-Davidson Road King - FLHR
  • 2009 Harley-Davidson Road King Classic - FLHRC
  • 2009 Harley-Davidson Street Glide - FLHX
  • 2009 Harley-Davidson Tri Glide Ultra Classic - FLHTCUTG
4.5 / 5.0
32 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
22
8
0
0
2
Finish
5.0 / 5
Fit
4.7 / 5
Performance
5.0 / 5
Quality
4.8 / 5
Style
4.9 / 5
Value
4.5 / 5
Loudness
Very Quiet
Average
Very Loud
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
power duals
i just finished installing the power dual header pipe with the monster ovals on my 2010 street glide with the screaming eagle stage 1 breather kit and the v&h fuel pak. took my time and followed all the instructions. came out mint and the bike runs perfectly. took longer to plug the fuel pak in and mount it than it did to program it. sounds great at idle and thru all rpm range. no popping on deceleration or down shifting. a few tips: dont let anyone tell you the monster duals wont fit a 2010. they do but not cvo bikes with the drop bottom saddle bags. remove the battery cover from under the seat (two bolts) and remove the two bolts holding the fuse box on. run the connector for the fuel pack up from the fuse box area to under the seat. takes about five mins. the v&h instructions show them feeding the fuel pack unit between the frame and fuse box compartment (impossible). go on line to get the lastest values. tip on the stage 1 kit. do not remove your gas tank as they say in the instructions. there is no reason to, took 20 mins to install the stage 1 kit. last tip if you are going from a two into 1 to duals all you need to mount the left side muffler is the rubber insulator( got it from the dealer) that goes into the bracket on the saddle bag support. the support brackets and bolts are in with the mufflers (monster duals anyway). i had a blast doing my own work. total time invested about 6 hours. dennis kirk staff was great. i strongly recommend them and the v&h products i used.
July 24, 2010
Fit
4 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
What a differnce adding the Power Duals made.
I installed the Vance and Hine Monster Oval Slip-On (w/black tips) and a Fuelpack and HD Stage 1 on my 2010 FLHTCU HD. They sound and look great, I did notice having the stock head pipes (to much back pressure from the catalytic converter?) didn't quite seem to have any top end and my bike seemed sluggish at times. I order the VH Power Duals on Wednesday and received them Friday and of course I had to install them, it took about 4 hours to complete. The fit was very tight, not like any other head pipes I’ve installed before from VH. After spending another hour adjusting everything, including all the heat shields and reprogramming the Fuelpack I was able to take it out for short test ride, what a difference the Power Duals head pipes made combined with MO Slip-On, Fuelpack and Stage 1. Today (Saturday) I was able to take my bike out for a few hours, I’m amazed what a difference it was by just adding the Power Duals head pipes and the sluggishness did go away . Also, these definitely did not put out as much heat as the stock pipes. Once again Dennis Kirk came through and beat any web price!
June 12, 2010
Fit
4 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Vance & Hines Power Duals Headpipes
The cover over the power chamber scratched two of the other heat shields. It was partly my fault but if it's designed to overlap a another chromed finished part it should not have sharp edges on it's back side.
November 30, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
V&H Power Duals
The fit, form and function of these pipes are everything I expected and more!! If you have any mechanical ability you should not have any install problems at all. I am also very impressed with the performance of the power duals with noticable improved hp and sound. I highly recommend these for a great upgrade to your ride!!
September 15, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Nice
I love these pipes, they look good, sound good and took the right side heat problem away.
May 5, 2011
Dissapointed in V&H design for 2010
This is not a typical review as I did not put power to these pipes and sent them back. My problem is with esthetics. The 2009 units look great. The 2010 unit has the O2 sensor on the rear cylinder header located way up on the pipe and pointing forward. It is not concealed at all. I am dissapointed the V&H did not show this either on their web site, catalog or instruction sheets. IMO I think it looks hideous It's a beautiful set of headers with a big wart on them. If you don't find it detracting or just don't care, that's great. Enjoy all the performance benefits I am sure they deliver. I really wanted these to work but not willing to compromise the look of my bike. I give it a 1 because I think the photographic representation of this product is misleading. BTW, Dennis Kirk has been terrific throughout this purchase and return and I will definetly do business with them in the future.
August 17, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Crisp & snappy
Straight forward install. These pipes enhanced the performance & looks of our streetglide. Impressive chrome finish on the heat shields. Well worth the investment!
April 4, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
No Review Title Entered By User
Installed Power duals and Monster ovals on 2010 FLHTK. Ease of install, best prices on the net, great delivery time. System sounds great on the bike. Already recommending to other riders.
July 26, 2010
Fit
2 / 5
Quality
3 / 5
Style
5 / 5
Value
4 / 5
v n makes a good product
a have used a few of vh pipes before and think they were the best but the power duels heat covers fit do not live up to v h norm
March 26, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Great product
Well made product that was easy to install. Paired with some good mufflers this is a must have for all 2010 Harley touring bikes. Quick shipping by Dennis Kirk made the whole experience even better. You will get more business from me in the future. Thanks!
July 26, 2010

Instructions and Manuals for Vance & Hines Power Duals Head Pipes - 16759

You May Also Be Interested In