Overview of Paughco Chrome 14 in. Bagger Werx Preassembled 1-1/4 in. Dresser Ape Hanger Handlebar Kit - 183310
- 1 1/4 in. smooth handlebars made of .120 in.-thick heavy-duty wall tubing with mounting area stepped down to 1 in. diameter and knurled to accommodate most risers
- Feature radio and cruise control switches and come with clutch starting safety switch installed for 07-12 models; for 96-06 models reference wire diagram included with handlebars
- Chrome bars feature chrome switches/housings and chrome ribbed grips
- Notched for Throttle By Wire (Electronic Throttle Control) applications and include a Throttle By Wire wire harness extension kit along with pre-installed pull string to make it easier for installing the Throttle By Wire unit
Not for FLHX with dealer installed cruise control
Models with radio only or cruise only have option to use supplied block off switch plugs if desired or leave extra switches for future use.
(1) Handlebar with controls and switch housing
(2) black/chrome grips, one installed on bar
(14) Male wire connectors
(14) Female wire connectors
(1) roll string
(2) Allen wrenches
(2) #6-32 x 3/4" button head bolts
(6) #6-32 x 1/4" button head bolts
(6) Cable ties
(26) Wire shrink wraps
(1) Wire harness
(1) Dielectric grease
Center Width: 13"
End Rise: 18"
1" Diameter Clamping Width: 5"
Inside Width of Knurling/Outside: 2 1/2"/4 1/2""
Drilled for Internal Wiring: Yes
Dimpled to Prevent Pinching Control Wires: No
Three Notches for 08-up H-D with Electronic Throttle: Yes
Specs for Paughco Chrome 14 in. Bagger Werx Preassembled 1-1/4 in. Dresser Ape Hanger Handlebar Kit - 183310
||15 3/4 in.
||Notched for Throttle By Wire
|Diameter - Handlebar
||1 1/4 in.
|Pullback/Sweep - Handlebars
Alternate/OEM Part Number(s):