Overview of Paughco Black +3 in. Over Stock (30 in.) Custom Wide Springer Fork Assembly - NS181SD-3BLK
Arrive bolt-on ready and fully assembled with shocks and include: fork stem, top nut, crown nut, top clamp and inner and outer springs
Available with 3" over stock length springer for Dyna Glides and standard height Sportsters, or with a stock length springer for Sportster models that come pre-lowered from the factory
Paughco springers will now work with OEM fork locks
Springers do not include headlight or risers
Both springers use standard 1" neck bearings
Distance between where axle goes is approximately 10"
Minimum inside width is approximately 7-3/4"
Available in chrome or black powder coat
Made in the U.S.A.
NOTE: Overall length is measured from the top of the top clamp to the center of the rear leg pivot. Please note that 27" stock length forks are the same length as OEM forks used on 48-84 FLH Big Twins. The correct length for the equivalent of an FXSTS springer fork would be +3" over stock (30" total).
3/4" Axle Kit Part No. 55-01416; for single or dual flange wide hub wheels when no brakes or speedometer drive are required
3/4" Axle Kit Part No. 55-01417; for use with single disc 84-99 FXST Softail hubs with OEM bearing spacers removed
3/4" Axle Kit Part No. 55-01418; for use with single disc 84-99 FXST Softail hubs and the OEM springer caliper mount
OPTIONAL OEM-STYLE CALIPER BRACKET:
Chrome caliper bracket (for Paughco springs only with 84-99 OEM front caliper)