You May Also Be Interested In
-
Part #: 2370M08100 Mfg Part #: 2370M08100Possible Alternative
-
Part #: B1024 Mfg Part #: B1024Other People Bought
Replacement Ring Set: 131118SR Replacement Wrist Pin: S461 Replacement Circlips: 14420 NOTE: Dennis Kirk recommends the following preliminary work to be performed by a qualified mechanic prior to installing new pistons. If the old piston has failed, determine the cause and remedy the problem before replacing. Air leaks and/or a lean fuel mixture are the two biggest causes of burned pistons. In cases where any part of the old piston is broken or burned through, the crankcase should be disassembled and throughly flushed of any debris. Our pistons, rings and kits are sold by application and bore size. Please note that STANDARD and OVERSIZES are not indicated. To get the correct part, you must know the standard bore size to make sure you are ordering either the standard or correct amount of oversize that you need. If you have any questions, please call Technical Service. |
Bore Size | 81 mm |
---|---|
Type | Piston Assembly |
Type | Piston w/Ring Set |
Units | Each |
Weight | 1.25 lbs |
Bore Size | 81 mm |
---|---|
Type | Piston Assembly |
Type | Piston w/Ring Set |
Units | Each |
Weight | 1.25 lbs |
Part 131118S fits the following machines