Overview of Parts Unlimited OEM-Type Piston Assembly - 58mm Bore - 8048
Bore Size: Standard
NOTE: Dennis Kirk recommends the following preliminary work to be performed by a qualified mechanic prior to installing new pistons. If the old piston has failed, determine the cause and remedy the problem before replacing. Air leaks and/or a lean fuel mixture are the two biggest causes of burned pistons. In cases where any part of the old piston is broken or burned through, the crankcase should be disassembled and thoroughly flushed of any debris.
Our pistons, rings and kits are sold by application and bore size. Please note that STANDARD and OVERSIZES are not indicated. To get the correct part, you must know the standard bore size to make sure you are ordering either the standard or correct amount of oversize that you need. If you have any questions, please call Technical Service.
Cross reference number(s):8048
Specs for Parts Unlimited OEM-Type Piston Assembly - 58mm Bore - 8048
|Bore Size||58 mm|
|Type||Piston w/Ring Set|
Fitment for Parts Unlimited OEM-Type Piston Assembly - 58mm Bore - 8048See if this part fits your ride
Part 13561 fits the following machines
- 1976 John Deere 400
- 1978 John Deere Cyclone 340
- 1977 John Deere Cyclone 340
- 1976 John Deere Cyclone 340
- 1975 John Deere JDX4