Need Assistance?
Legendary Service... Ask Your Friends - Since 1969
800.969.7501
Over 160K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

NAMZ Custom Cycle Products Complete Bike Harness - NCBH-01-A

  • Part #:
    218310
  • Manufacturer Part #:
    NCBH-01-A

MSRP Price: $299.95

Our Price: $269.96

You Save:
$29.99 (10%)
1 on Hand

Overview of NAMZ Custom Cycle Products Complete Bike Harness - NCBH-01-A

    NAMZ Complete Bike Harness with Starter Relay, 3-Circuits, Self Canceling and Run, Brake & Turn Signal Module
  • OEM color-matching harness with 11-second self canceling turn signal module
  • Fuse block holds a full size, commonly available & replaceable starter relay and (3) ATO fuses
  • A 30-Amp circuit breaker is installed and is ready for any regulator/charging system
  • Harness provides running light and turn signal functions to the front turn signals, run, brake and turn signal functions for the rear turn signals
  • Oil, neutral, high beam, and turn signal indicator wiring
  • Color matching handlebar switch wiring as found on '96-'13 non-glide models
  • Headlight wiring with headlight socket and terminals
  • Front turn signal connectors and terminals
  • Rear fender harness with connectors and terminals
  • Key switch wiring with ring terminals
  • Coil wire with ring terminals, tachometer, horn, oil sending unit, brake switch and neutral switch wiring with terminals
  • Sections of 3/16 in., 1/4 in., 3/8 in. and 1/2 in. ID heat shrink included
  • Heavy gauge 12 (+) power and (-) ground wires with terminals for battery connection
  • The NCBH-01-A complete motorcycle harness is the perfect start for any project bike or OEM model re-wire. Works with any stand alone, Evo or Twin Cam ignition system. Designed to operate with a two-position key switch
  • Key start switches can be used with a simple wiring modification. (Ignition system and key switch are not included with this harness)

    Included Items:
    (1) Wire harness
    (1) 1/2 in. ID x 4' shrink tubing
    (1) 3/8 in. ID x 2' shrink tubing
    (1) 1/4 in. ID x 6' shrink tubing
    (1) 1/8 in. ID x 4' shrink tubing
    (1) 3/16 in. ID x 6' shrink tubing
    (4) Black flag wire terminals
    (2) 1/4 in. ring terminals
    (1) Headlight socket
    (3) Female spade connectors
    (1) 1/4 in. ring terminals
    (5) 3/16 in. ring terminals
    (1) Headlight socket
    (3) Female spade connectors
    (1) 1/4 in. cap terminal
    (2) Orange wedge locks
    (2) Green wedge locks
    (12) Male bullet terminals
    (12) Female bullet terminals
    (1) Black female 6 pin plug
    (1) Black male 6 pin plug
    (1) Gray male 6 pin plug
    (1) Female 6 pin plug
    (10) Female bullet terminals
    (10) Male bullet terminals
    (1) Black flat male 6 pin plug
    (1) Black flat female 6 pin plug
    (1) Black flat male 4 pin plug
    (1) Black flat female 4 pin plug
    Instructions

Specs for NAMZ Custom Cycle Products Complete Bike Harness - NCBH-01-A

Type Wire Harness
Units Kit
Weight 2.70 lbs

Cross reference number(s):

21200769

Specs for NAMZ Custom Cycle Products Complete Bike Harness - NCBH-01-A

Type Wire Harness
Units Kit
Weight 2.70 lbs

Fitment for NAMZ Custom Cycle Products Complete Bike Harness - NCBH-01-A

See if this part fits your ride

Part 218310 fits the following machines

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Fit
5.0 / 5
Quality
5.0 / 5
Style
5.0 / 5
Value
5.0 / 5
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Great harness!
This is a really good harness for custom applications or even to replace existing wiring. It has all the connectors needed and the instructions were clear and accurate.
April 26, 2016
Nice complete harness, was easy to install. Requires minimal electrical knowledge with the diagram provided. They provide just the right amount of heat shrink and connectors for everything, but to crimp these connectors you need an open end terminal crimper which I pick up at amazon for 30 bucks. Only complaint was I was missing the terminal for the neutral switch which should be provided. After a bit of research I found the part# and picked one up at the Harley dealer for 3 bucks. I would defiantly recommend this harness to anyone with a custom bike that wants all the features of a stock bike.
October 1, 2017
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Instructions and Manuals for NAMZ Custom Cycle Products Complete Bike Harness - NCBH-01-A