Overview of Motion Pro Rev2 Throttle Kit - 01-2738
Note: For use with stock throttle bodies/ carburetors and Rev2 throttle assembly only.
IMPORTANT - Rev2 does not have the starter and kill switch wiring or switches that are built into your stock throttle assembly. The use of Rev2 throttle requires and aftermarket kill switch and starter button assembly (21-7859) not included in the kit. Rev2 kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer aftermarket handlebars or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function.
WARNING: Improper installation could result in great bodily injury or death
(1) Dual Cable
Housing Length: 26 in./25 1/4 in.
Elbow Length: 1 3/4 in.
Elbow Degree: 90 degree
Travel: Up to 4 11/16 in./5 1/4 in.
(1) Throttle tube
(2) 1 in. diameter x 5 in. long black rubber grips
(1) Cast aluminum throttle assembly
(1) 35mm black cam reel
(1) 40mm blue cam reel
(1) 45mm red cam reel
(1) 50mm yellow cam reel
(1) Street/Road race orange cam reel
(2) 6mm-1.00 x 40mm socket head bolts
(2) 6mm x 18mm aluminum spacers
Cross reference number(s):06320654
Specs for Motion Pro Rev2 Throttle Kit - 01-2738
Fitment for Motion Pro Rev2 Throttle Kit - 01-2738See if this part fits your ride
Part 1911228 fits the following machines
- 2005 Yamaha YZF-R6 600
- 2004 Yamaha YZF-R6 600
- 2003 Yamaha YZF-R6 600
- 2009 Yamaha YZF-R6S 600
- 2008 Yamaha YZF-R6S 600
- 2007 Yamaha YZF-R6S 600
- 2006 Yamaha YZF-R6S 600