Note: Rev2 kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific, therefore in some situations, the Rev2 may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer aftermarket handlebars or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function.
WARNING: Improper installation could result in great bodily injury or death.
Note: Rev2 cables can only be used with stock throttle body (or carburetor where applicable) and Rev2 throttle.
(1) Dual cable
Housing Length: 22 3/4 in.
Elbow Length: 1 3/4 in.
Elbow Degree: 90 degree
Travel: Up to 3 7/8 in./3 13/16 in.
(1) Throttle tube
(2) 1 in. diameter x 5 in. long black rubber grips
(1) Cast aluminum throttle assembly
(1) 35mm black cam reel
(1) 40mm blue cam reel
(1) 45mm red cam reel
(1) 50mm yellow cam reel
(1) Street/Road race orange cam reel
(2) 6mm-1.00 x 40mm socket head bolts
(2) 6mm x 18mm aluminum spacer