Tool worked like it should except that the little handle that screws into it broke off when I was trying to turn the center bolt. I had to use a strap wrench to hold the puller still. I then used an impact wrench to break the nut loose. Took longer to install the tool than to remove the flywheel. Tool does not come with instructions. I used it on my 98 WR400 to remove the stator. Over all it did the job. The handle is useless if you don't have an impact driver.
The little handle broke in the first minute of use , and noticeable wear on threads after first use, even with anti seize on the threads , I don’t think it will last much longer , but it did take the flywheel off .