Moose Vent Cap - 0703-0262

I replace all the vent hoses on my quads with Moose vent caps. I put a small amount of crazy glue (be careful not to plug the vent hole) on the stem of the gas cap so the vent caps stay secure.

I thought it was just the vent cap but it comes with just the right amount of tubing to put it on your gas cap you don't need to buy extra tubing for it.

No Review Text Entered By User

This Moose vent cap is simple device that prevents a vacuum build up in the gas tank. I will never have to worry about the long vent line from the gas cap to under the steering stem being kinked again shutting off the gas flow.

Easier to deal with than a standard vent hose, looks better as well. A very tight fit on the cap, but that's a good thing in my eyes.

No Review Text Entered By User

This does what it's suppose to, but one of the biggest plusses I found was that their would be no more gas in the steering stem!

fits my 4.2 gal acerbis tank like a dream, just remember, if you use a fast fill gas tank, this will be in the way

No Review Text Entered By User

Purchased this (twice - last one got torn from the bike and lost in a harescramble) to replace that eyesore vent hose tucked onto the steering stem. No instructions supplied, so I figured I would just heat the bottom with a lighter and push it onto the gas cap while the heated hose was pliable. Seemed to fit just fine. But, later I did notice a hissing noise when I had stopped on a trail ride - sounded like gasoline fume pressure was escaping through the vent, and some gasoline had seeped from around the base - pushed down on it and it has since seemed to have stopped. Gonna cinch a zip-tie around the base for good measure. Moose needs to supply some intructions for proper insallation. Looks good and tidy, though.

No Review Text Entered By User

No Review Text Entered By User

Better than a vent line, easier to remove gas cap. Could be better priced considering the amount of material you get for the money.