Overview of Moose Chain Brush - 3806-0022
Cross reference number(s):153-5300, 38060022
Specs for Moose Chain Brush - 3806-0022
|Type||Tool - Chain|
Fitment for Moose Chain Brush - 3806-0022See if this part fits your ride
Part 283545 fits the following machines
It is really sized for 530 chain, which is about .800" (about 20mm) overall outside width. The center space between the side bristles on the brush is about .670" (17mm), so the bristles will deflect and drag both sides of the chain as it passes through the brush. A 520 chain would be 1/8" narrower, so about .675" (17mm). The bristles would not deflect much, if any at all, as the chain is drawn through the brush. However, I think the brush will still work. Just hold the brush at an angle to the chain, or pull the brush toward you as you spin the wheel to clean one side of the chain, then push the brush away from you to clean the other side.
All of what I've said assumes a non O-ring chain. If you have a 520 O-ring chain, the overall outside width will be about the same as a non O-ring 530 chain. In this case, the brush will be a good fit.
Hope this helps.