Moose Carburetor Rebuild Kit - 1003-0017

I run my blaster on trails, ice races, race tracks so i need to rebuild every year to keep it in shape! This is a good product that you can depend on to get the job done with same quality as stock parts so you know it will run like new every time. even in the sand box i live in.

oem float leaked and this kit fixed the problem. Made the fourwheeler run and idel like almost new great vaule

These kits came with all the pieces I needed. The gaskets and o-rings fit properly and didn't swell when in contact with gasoline. I've installed these kits in Yamaha Big Bear 400 and a Yamaha Warrior 350. Both kits were very good. I would buy them again.

Ordered the kit number recommended by the website for my 84 ATC200ES and its not correct. The bowl gasket included is just a big round o-ring, the bowl on this carb has many corners and its a difficult shape. The bowl groove is not deep enough to just use a standard o-ring, guess i could glue it in bit by bit to keep it in place for install but what a pain! Also the small metal washer that is used with the small o-ring for the pilot screw is too large and will not fit the opening for it, installed with just the o-ring hope that works ok. Also included another small mystery o-ring that i cannot find any use for so far. Overall an ok kit if you have a good bowl gasket and parts left over from the original carb build but if your trying to work on a carb that was already torn down and missing parts its not going to give you everything you need and some of the parts are wrong regardless.

This kit seemed to be everything that i needed to get my Polaris up and running like new again. The delivery arrived a week before the anticipated date mentioned when I made the order.

Excellent deal, kit cost half the price of just the needle and seat from Su**ki. Good quality... made a huge difference in performance.

Had everything i nedded. Ordered in on Thursday late afternoon and was installing it on Friday night. Great service.

No Review Text Entered By User

I bought a carb kit for my 1986 trx350 and 1994 suzuki 4 wheelers and what a nice kit. The had everything needed for a complete rebuild. The 4 wheelers ran perfect afterwards so fitment of gaskets and jets were perfect.

However my 87 Yamaha Moto-4 would not run with the supplied needle and main jet.

Product qualitly is great, easy to install, included all parts for a rebuild.

It is not easy to find parts for a 31 year old ATV. DennisKirk had the carburetor rebuild kit. It arrived at the post office four days sooner than expected, and the Suzuki was running great before day's end.

No Review Text Entered By User

go kit fit well works great

No Review Text Entered By User

No Review Text Entered By User

Never had a problem with this kit. Always works like a dream. I buy this kit for every machine i buy. Makes every three wheeler run perfect.

No Review Text Entered By User

No Review Text Entered By User

No Review Text Entered By User

No Review Text Entered By User

I had to rebuild my carb on my 660 Grizzly ATV. I found this to be a very complete kit and was a lot better price wise than purchasing the individual items separtely from the dealership. The kit contained all the gaskets and jets needed to rebuild the carb along with a new float needle and seat. The only problem I had was with the main needle being brass rather than stainless steel like the factory. Other than that I rebuilt the carb and all the items in the kit fit properly.

No Review Text Entered By User

Although I only needed the bowl gasket, I used the entire kit which contained everything needed to rebuild the carb on our 1985 Honda 4Trax.

Good product. Came with everything needed for rebuild. Decent price. Should include new springs with the kit though.

No Review Text Entered By User

No Review Text Entered By User

It was very complete and fit perfect

Product is great. 83 200e runs like new again. just wish the oring would have been fitted. But i can live with that for the price.

Don't normally use aftermarket kits to clean my carbs but this as changed my mind. It is much cheaper than getting all the stock parts and everything matched. save your money and buy this instead of stock.

I needed a good kit to rebuild my atc200m and this one was it, most kits come with a round bowl gasket this one came with the shape I needed so it fit great without taking me an hour to get the bowl back on. Worth it everytime all the parts fit great, another great product from moose.

All the parts fit fine and ended up being a good rebuild.

The kit contained everything I needed for a quality rebuild including new Jets and gaskets and all the parts fit perfect. It was easy to find and order the proper listing on the website and the delivery was on time.

No Review Text Entered By User

No Review Text Entered By User

No Review Text Entered By User

No Review Text Entered By User

Kit comes with everything

No Review Text Entered By User

the parts were a perfect fit didnt have to modify anything went together with ease

Very good kit good parts and all the parts u need to rebuild your carb.

good kit but did not contain metering rod clip or main metering jet as shown.

No Review Text Entered By User

just like factory restored throtle response i give this two thumbs up

Worked on a buddy's Grizzly that had sat with junk gas for so long that the carb got all corroded. Cleaned it all up, but the float needle was worn so I got this kit. nice to replace everything for so cheap. Great kit for the price!

Fit is real good. My four wheeler runs like new again. Good value for the money

The product worked as described and since the stealership requires you to buy individual parts to rebuild a carb, it is far faster and easier to order here. The delivery time (2 days) is also exceptional.

The kit worked great! Everything went together without any problems. My machine runs better than ever.

Comes with everything for a complete rebuild.Worked perfectly.Recommend to anyone.

No Review Text Entered By User