Need Assistance?
Legendary Service... Ask Your Friends - Since 1969
800.969.7501
Over 160K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Magnum Sterling Chromite II Caliber Handlebar Installation Kit W/ 14 in. Bagger Bars - 38868-214

  • Part #:
    5901543
  • Manufacturer Part #:
    38868-214

MSRP Price: $619.95

Our Price: $547.88

You Save:
$72.07 (12%)
1 on Hand

Overview of Magnum Sterling Chromite II Caliber Handlebar Installation Kit W/ 14 in. Bagger Bars - 38868-214

For models listed w/Non ABS

  • The only complete handlebar kits with matching braided cables and brake lines that include Magnum Caliber 1-1/4” handlebars
  • Available in Bagger or Ape Hanger styles for select ABS and non-ABS Harley-Davidson® motorcycles with 12”, 14” and 16” height options
  • MAGNUM 1-1/4” Caliber handlebars are manufactured with the highest quality construction, including machined control mounts (not swaged) and feature high luster chrome or gloss black finish for an unsurpassed appearance
  • All handlebars are 1-1/4” diameter, have 3-1/2” on center knurling, work with standard controls, including hydraulic clutch, and are machined for internal wiring and electric throttle control
  • All Caliber handlebars are preloaded with E-Z pull-thru sleeving to make wiring installations a breeze
  • Kits include: Magnum 1-1/4” Caliber handlebars, throttle and idle cables (except 08-15 Dressers and 16 Softail models), a clutch cable or hydraulic clutch line, brake lines, copper crush washers, hardware and wiring extensions
  • All cable and brake lines feature either Sterling Chromite® II or Black Pearl braid with highly polished chrome or black chrome plated fittings
  • All cables are a low effort, high efficiency design that meets or exceeds all OE specifications for fitment, construction, endurance
  • Kits for dual disc models include an all brazed manifold that eliminates leaks, alignment problems, and unattractive threaded connections
  • Brake lines exceed all DOT FMVSS-106 requirements
  • Made in the U.S.A.

NOTE: Cable and line lengths are based on using 2” risers



Included Items:

(1) Chrome steel handlebars

(1) Clear vinyl stainless steel hydraulic clutch line measures 82" long W/(1) 3/8"/10mm 35-degree banjo fitting and (1) 3/8"-24 inverted flare

(1) Clear vinyl stainless steel brake line measures 29" long W/(1) 3/8"/10mm 35-degree banjo fitting & (1) female AN#3 fitting

(2) 14-1/2" Can-bus wiring harness

(1) 14-1/4" Throttle by wire harness

(1) Clear vinyl stainless steel dual disc lower brake line measures 41-3/4" long W/(2) 3/8"/10mm 90-degree banjo fittings & (1) AN#3

(8) 3/8"/10mm Copper crush washers

(3) "P" Clamps

Instructions

 

OFF BIKE DIMENSIONS

 

Width: 35-3/4"                                         

Rise: 15-1/2"                                               

Pullback: 12"                                           

Center width: 11-1/2"                                       

End rise: 14-1/4"                                           

1" diameter clamping width: 6"                         

Inside width of knurling/outside: 2-1/2"/4-1/2"            

Drilled for internal wiring: Yes                       

Dimpled to prevent pinching control wires: No          

Three notches for 08-up h-d w/electronic throttle: Yes 

Specs for Magnum Sterling Chromite II Caliber Handlebar Installation Kit W/ 14 in. Bagger Bars - 38868-214

Center Width 12 in.
Description Pre-Drilled
Description Knurled
Description Notched for Throttle By Wire
Diameter - Handlebar 1 1/4 in.
End Rise 14 1/4 in.
Overall Width - Handlebars 34 3/4 in.
Pullback/Sweep - Handlebars 11 1/2 in.
Rise 14 in.
Type Ape Hanger
Units Each
Weight 13.85 lbs

Specs for Magnum Sterling Chromite II Caliber Handlebar Installation Kit W/ 14 in. Bagger Bars - 38868-214

Center Width 12 in.
Description Pre-Drilled
Description Knurled
Description Notched for Throttle By Wire
Diameter - Handlebar 1 1/4 in.
End Rise 14 1/4 in.
Overall Width - Handlebars 34 3/4 in.
Pullback/Sweep - Handlebars 11 1/2 in.
Rise 14 in.
Type Ape Hanger
Units Each
Weight 13.85 lbs

Fitment for Magnum Sterling Chromite II Caliber Handlebar Installation Kit W/ 14 in. Bagger Bars - 38868-214

See if this part fits your ride

Part 5901543 fits the following machines

Harley-Davidson
  • 2016 Harley-Davidson Street Glide - FLHX
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Instructions and Manuals for Magnum Sterling Chromite II Caliber Handlebar Installation Kit W/ 14 in. Bagger Bars - 38868-214

You May Also Be Interested In