Dennis Kirk Inc.
Search Within
Ride Search
Top 3 Product Matches

Magnum Sterling Chromite II Caliber Handlebar Installation Kit W/ 12 in. Bagger Bars ABS - 38869-212

  • Part #:
    5901545
  • Manufacturer Part #:
    38869-212

MSRP Price: $841.95

Our Price: $757.76

You Save $84.19 (10%)
loading...
Overview of Magnum Sterling Chromite II Caliber Handlebar Installation Kit W/ 12 in. Bagger Bars ABS - 38869-212

For models listed w/ABS

  • The only complete handlebar kits with matching braided cables and brake lines that include Magnum Caliber 1-1/4” handlebars
  • MAGNUM 1-1/4” Caliber handlebars are manufactured with the highest quality construction, including machined control mounts (not swaged) and feature high luster chrome or gloss black finish for an unsurpassed appearance
  • All handlebars are 1-1/4” diameter, have 3-1/2” on center knurling, work with standard controls, including hydraulic clutch, and are machined for internal wiring and electric throttle control
  • All Caliber handlebars are preloaded with E-Z pull-thru sleeving to make wiring installations a breeze
  • Kits include: Magnum 1-1/4” Caliber handlebars, throttle and idle cables (except 08-15 Dressers and 16 Softail models), a clutch cable or hydraulic clutch line, brake lines, copper crush washers, hardware and wiring extensions
  • All cable and brake lines feature either Sterling Chromite® II or Black Pearl braid with highly polished chrome or black chrome plated fittings
  • All cables are a low effort, high efficiency design that meets or exceeds all OE specifications for fitment, construction, endurance
  • Kits for dual disc models include an all brazed manifold that eliminates leaks, alignment problems, and unattractive threaded connections
  • Brake lines exceed all DOT FMVSS-106 requirements
  • Made in the U.S.A.

NOTE: Cable and line lengths are based on using 2” risers



Included Items:

(1) Chrome steel handlebars

(1) Clear vinyl stainless steel hydraulic clutch line measures 80" long W/(1) 3/8"/10mm 35-degree banjo fitting and (1) 3/8"-24 inverted flare

(1) Clear vinyl stainless steel brake line measures 24" long W/(1) 3/8"/10mm 35-degree banjo fitting & (1) female AN#3 fitting

(1) Clear vinyl stainless steel mid line brake measures 48" long W/(1) 12mm  banjo fitting & (1) male AN#3

(2) 14-1/2" Can-bus wiring harness

(1) 14-1/4" Throttle by wire harness

(1) Clear vinyl stainless steel right lower brake line measures 88" long W/(2) 3/8"/10mm 90-degree banjo fittings 

(1) Clear vinyl stainless steel left lower brake line measures 82" long W/(2) 3/8"/10mm 90-degree banjo fittings

(12) 3/8"/10mm Copper crush washers

(2) 12mm Copper crush washers

(4) 15" Black cable ties

Instructions

 

OFF BIKE DIMENSIONS

 

Width: 36"                                         

Rise: 13-3/4"                                               

Pullback: 9-1/8"                                           

Center width: 11-1/2"                                       

End rise: 11-5/8"                                           

1" diameter clamping width: 5-1/4"                         

Inside width of knurling/outside: 2-1/2"/4-1/2"            

Drilled for internal wiring: Yes                       

Dimpled to prevent pinching control wires: No          

Three notches for 08-up h-d w/electronic throttle: Yes 

 

Specs for Magnum Sterling Chromite II Caliber Handlebar Installation Kit W/ 12 in. Bagger Bars ABS - 38869-212

Center Width 12 in.
Description Pre-Drilled
Description Knurled
Description Notched for Throttle By Wire
Diameter - Handlebar 1 1/4 in.
End Rise 11 5/8 in.
Overall Width 34 3/4 in.
Pullback/Sweep - Handlebars 11 1/2 in.
Rise 12 in.
Type Ape Hanger
Units Each
Weight 14.70 lbs

Alternate/OEM Part Number(s):

06013664
Specs for Magnum Sterling Chromite II Caliber Handlebar Installation Kit W/ 12 in. Bagger Bars ABS - 38869-212
Center Width 12 in.
Description Pre-Drilled
Description Knurled
Description Notched for Throttle By Wire
Diameter - Handlebar 1 1/4 in.
End Rise 11 5/8 in.
Overall Width 34 3/4 in.
Pullback/Sweep - Handlebars 11 1/2 in.
Rise 12 in.
Type Ape Hanger
Units Each
Weight 14.70 lbs
Fitment for Magnum Sterling Chromite II Caliber Handlebar Installation Kit W/ 12 in. Bagger Bars ABS - 38869-212

Part 5901545 fits the following machines

Make Sure This Fits Your Ride
Harley-Davidson
  • 2016 Harley-Davidson Electra Glide Ultra Classic - FLHTCU
  • 2016 Harley-Davidson Electra Glide Ultra Classic Low - FLHTCUL
  • 2016 Harley-Davidson Electra Glide Ultra Limited - FLHTK
  • 2016 Harley-Davidson Electra Glide Ultra Limited Low - FLHTKL
  • 2016 Harley-Davidson Street Glide - FLHX
  • 2016 Harley-Davidson Street Glide Special - FLHXS
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Will this fit a 2016 cvo limited?flhtkse
A shopper on Dec 2, 2017
BEST ANSWER: It should work if you have a 1" clamping area where they attach
Instructions and Manuals for Magnum Sterling Chromite II Caliber Handlebar Installation Kit W/ 12 in. Bagger Bars ABS - 38869-212

You May Also Be Interested In