Need Assistance?
Legendary Service... Ask Your Friends - Since 1969
800.969.7501
Over 160K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Magnum Black Pearl Caliber Handlebar Installation Kit for 14 in. Bagger Bars - 48834-214

  • Part #:
    5901582
  • Manufacturer Part #:
    48834-214

MSRP Price: $809.95

Our Price: $768.99

You Save:
$40.96 (5%)
1 on Hand

Overview of Magnum Black Pearl Caliber Handlebar Installation Kit for 14 in. Bagger Bars - 48834-214

For models listed w/ABS

  • The only complete handlebar kits with matching braided cables and brake lines that include Magnum Caliber 1-1/4” handlebars
  • Available in Bagger or Ape Hanger styles for select ABS and non-ABS Harley-Davidson® motorcycles with 12”, 14” and 16” height options
  • MAGNUM 1-1/4” Caliber handlebars are manufactured with the highest quality construction, including machined control mounts (not swaged) and feature high luster chrome or gloss black finish for an unsurpassed appearance
  • All handlebars are 1-1/4” diameter, have 3-1/2” on center knurling, work with standard controls, including hydraulic clutch, and are machined for internal wiring and electric throttle control
  • All Caliber handlebars are preloaded with E-Z pull-thru sleeving to make wiring installations a breeze
  • Kits include: Magnum 1-1/4” Caliber handlebars, throttle and idle cables (except 08-15 Dressers and 16 Softail models), a clutch cable or hydraulic clutch line, brake lines, copper crush washers, hardware and wiring extensions
  • All cable and brake lines feature either Sterling Chromite® II or Black Pearl braid with highly polished chrome or black chrome plated fittings
  • All cables are a low effort, high efficiency design that meets or exceeds all OE specifications for fitment, construction, endurance
  • Kits for dual disc models include an all brazed manifold that eliminates leaks, alignment problems, and unattractive threaded connections
  • Brake lines exceed all DOT FMVSS-106 requirements
  • Made in the U.S.A.

NOTE: Cable and line lengths are based on using 2” risers



Included Items:

(1) Black steel handlebars

(1) Black pearl hydraulic clutch line measures 82" long W/(1) 3/8"/10mm 35-degree banjo fitting and (1) 3/8"-24 inverted flare

(1) Black pearl brake line measures 26" long W/(1) 3/8"/10mm 35-degree banjo fitting & (1) female AN#3 fitting

(1) Black pearl mid line brake measures 51-1/2" W/(1) 12mm banjo fittings & (1) AN#3

(1) Black pearl ABS right brake line measures 87-1/2" W/(1) 3/8"/10mm 90-degree banjo fitting & (1) 3/8"/10mm banjo fitting

(1) Black pearl ABS left brake line measures 87-1/2" W/(1) 3/8"/10mm 90-degree banjo fitting & (1) 3/8"/10mm banjo fitting

(6) 15" Colored throttle by wire wires

(2) 14-1/2" Can-bus harness

(6) 2-1/2" Shrink tubes

(1) 14" Shrink tubes

(12) 3/8"/10mm Copper crush washers

(2) 12mm Copper crush washers

(4) 15" Black cable ties

Instructions

 

OFF BIKE DIMENSIONS

 

Width: 35-3/4"                                         

Rise: 14-3/4"                                               

Pullback: 12"                                           

Center width: 12"                                       

End rise: 13-1/4"                                           

1" diameter clamping width: 5-7/8"                         

Inside width of knurling/outside: 2-1/2"/4-1/2"            

Drilled for internal wiring: Yes                       

Dimpled to prevent pinching control wires: No          

Three notches for 08-up h-d w/electronic throttle: Yes 

 

Specs for Magnum Black Pearl Caliber Handlebar Installation Kit for 14 in. Bagger Bars - 48834-214

Center Width 12 in.
Description Pre-Drilled
Description Knurled
Description Notched for Throttle By Wire
Diameter - Handlebar 1 1/4 in.
End Rise 13 1/4 in.
Overall Width - Handlebars 34 3/4 in.
Pullback/Sweep - Handlebars 11 1/2 in.
Rise 14 in.
Type Ape Hanger
Units Each
Weight 15.15 lbs

Specs for Magnum Black Pearl Caliber Handlebar Installation Kit for 14 in. Bagger Bars - 48834-214

Center Width 12 in.
Description Pre-Drilled
Description Knurled
Description Notched for Throttle By Wire
Diameter - Handlebar 1 1/4 in.
End Rise 13 1/4 in.
Overall Width - Handlebars 34 3/4 in.
Pullback/Sweep - Handlebars 11 1/2 in.
Rise 14 in.
Type Ape Hanger
Units Each
Weight 15.15 lbs

Fitment for Magnum Black Pearl Caliber Handlebar Installation Kit for 14 in. Bagger Bars - 48834-214

See if this part fits your ride

Part 5901582 fits the following machines

Harley-Davidson
  • 2015 Harley-Davidson Electra Glide Ultra Classic - FLHTCU
  • 2014 Harley-Davidson Electra Glide Ultra Classic - FLHTCU
  • 2015 Harley-Davidson Electra Glide Ultra Limited - FLHTK
  • 2014 Harley-Davidson Electra Glide Ultra Limited - FLHTK
  • 2015 Harley-Davidson Street Glide - FLHX
  • 2014 Harley-Davidson Street Glide - FLHX
  • 2015 Harley-Davidson Street Glide Special - FLHXS
  • 2014 Harley-Davidson Street Glide Special - FLHXS
There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Instructions and Manuals for Magnum Black Pearl Caliber Handlebar Installation Kit for 14 in. Bagger Bars - 48834-214

You May Also Be Interested In