Dennis Kirk Inc.
Search Within
Ride Search
Top 3 Product Matches

12" Chrome Twin Peaks 1-1/4" Handlebars - LA-7361-12

  • Part #:
    599933
  • Mfg Part #:
    LA-7361-12
  • OEM/Ref#:
1 / 1

12" Chrome Twin Peaks 1-1/4" Handlebars - LA-7361-12

  • Part #:
    599933
  • Mfg Part #:
    LA-7361-12
  • OEM/Ref#:
MSRP: $305.95

Price: $275.36 10% off!
Make sure this fits your ride
Ships Free
In Stock - 6 on Hand

Ships Today!
Order in the next
0 9
HR
3 8
MIN
4 2
SEC
LA Choppers 12" Chrome Twin Peaks 1-1/4" Handlebars - LA-7361-12
  • Handlebars with an emphasis on touring comfort
  • More parallel wrist angles for a perfect pullback angle and stress-free riding
  • Flowing bends on the uprights designed specifically for Batwing fairing bikes
  • Drilled for internal wiring
  • Work with hydraulic clutches
  • Can be used on cable and TBW (Throttle By Wire) applications
  • Accept H-D OEM heated grips.
  • Made in the U.S.A.


Included Items:

(1) Chrome 1-1/4" Steel Handlebar

Specifications
Part #: 599933
Mfg #: LA-7361-12
Center Width 12 in.
Clamping Diameter - Handlebars 1 in.
Description Knurled
Description Notched for Throttle By Wire
Description Pre-Drilled
Diameter - Handlebar 1 1/4 in.
Finish Chrome
Manufacturer Color Chrome
Overall Width 34 in.
Pullback/Sweep - Handlebars 6 in.
Rise 12 in.
Type Ape Hanger
Units Each
Weight 11.50 lbs
Alternate/OEM Part Number(s):
06012699
Fitment for LA Choppers 12" Chrome Twin Peaks 1-1/4" Handlebars - LA-7361-12

Part 599933 fits the following machines

Harley-Davidson
  • Electra Glide Classic - FLHTC 1996-2005, 2009-2013
  • Electra Glide Classic (EFI) - FLHTC 2007-2008
  • Electra Glide Classic Injected - FLHTC I 1996-2006
  • Electra Glide Injected CVO/SE - FLHTCSE 2004
  • Electra Glide Injected CVO/SE - FLHTCSE 2 2005
  • Electra Glide Police - FLHTP 2007-2020
  • Electra Glide Police Injected - FLHTP I 1999-2006
  • Electra Glide Standard - FLHT 1996-2006, 2009, 2019-2020
  • Electra Glide Standard (EFI) - FLHT 2007-2008
  • Electra Glide Standard Injected - FLHT I 2003-2006
  • Electra Glide Ultra Classic - FLHTCU 1996-1999, 2009-2019
  • Electra Glide Ultra Classic (EFI) - FLHTCU 2007-2008
  • Electra Glide Ultra Classic CVO/SE - FLHTCUSE 4 2009
  • Electra Glide Ultra Classic CVO/SE - FLHTCUSE 5 2010
  • Electra Glide Ultra Classic CVO/SE - FLHTCUSE 6 2011
  • Electra Glide Ultra Classic CVO/SE - FLHTCUSE 7 2012
  • Electra Glide Ultra Classic CVO/SE - FLHTCUSE 8 2013
  • Electra Glide Ultra Classic CVO/SE (EFI) - FLHTCUSE 2 2007
  • Electra Glide Ultra Classic CVO/SE (EFI) - FLHTCUSE 3 2008
  • Electra Glide Ultra Classic Injected - FLHTCU I 1996-2006
  • Electra Glide Ultra Classic Injected CVO/SE - FLHTCUSE 2006
  • Electra Glide Ultra Classic Low - FLHTCUL 2015-2016
  • Electra Glide Ultra Limited - FLHTK 2010-2020
  • Electra Glide Ultra Limited CVO/SE - FLHTKSE 2014-2020
  • Electra Glide Ultra Limited Low - FLHTKL 2015-2019
  • Street Glide - FLHX 2006, 2009-2020
  • Street Glide (EFI) - FLHX 2007-2008
  • Street Glide CVO/SE - FLHXSE 2010, 2015-2020
  • Street Glide CVO/SE - FLHXSE 2 2011
  • Street Glide CVO/SE - FLHXSE 3 2012
  • Street Glide Injected - FLHX I 2006
  • Street Glide Special - FLHXS 2014-2020
  • Street Glide Trike - FLHXXX 2010-2011
  • Tri Glide Ultra Classic - FLHTCUTG 2009-2020

Trending

Reviews & Questions
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 22 answers
THIS SITE SAY THESE HAVE A 10" PULL BACK BUT LA CHOPPER SITE SHOWS THE SAME PART# WITH A 6" PULL BACK. IS THIS SITE WRONG?
A shopper on Feb 22, 2017
BEST ANSWER: Im thinking it's a 6" pull back from the top of the bars to the bar ends and a 10" from where the risers attach to the bar ends.. since these are electa glide bars they have a rougly 4" kick back towards the bottom to get out from under the faring.. just buy them they are BADASS BARS!!!
Would this fit a 07 ultra classic?
A shopper on May 25, 2017
BEST ANSWER: I put them on a 2009 street glide which had throttle by wire but would work on a bike with cables also, only difference is the throttle by wire has a few knotchs on the right side to assist with the newer bikes sensor
do I need new cables to use these bars or does factory wiring fit?
A shopper on Jan 11, 2017
BEST ANSWER: 12" would require extended cables, use Part #57-5588 for use with these handlebars.
I have a 2013FLHX. DO I NEED ANY WIRES OR CABLES WITH THESE BARS.??
Charlie on Jun 23, 2018
BEST ANSWER: Installed on a 2006 FLHT. Very nice set of bars for the price and cables were needed for the clutch,brake,throttle and idle lines. I am 5"7 and these bars are extremely comfortable and my arms clear the fairing mirrors. My hands are almost even with my shoulder height when I sit straight up. They changed the whole look of the bike for the better and I am very happy with the purchase!
Your site says these bars do not fit 2016 flxhs but every where else shows this part number fitting. Is something different in these bars? because you have a better price!
David W on Apr 16, 2017
BEST ANSWER: I put these bars on my '15 FLHXS and they fit perfectly. I did buy Harley wire extensions but the stock clutch and brake lines are plenty long enough.
This part number on Drag Specialties website 0601-2699 aka LA-7361-12 clearly states it fits 2014 FLHXS. Why on your website does it NOT fit?????
A shopper on Feb 27, 2019
BEST ANSWER: These should work for you
Drag Specialties website says these fit 2014 FLHXS. Why the discrepancies on your website?? Confusing consumers?
Paul H on Feb 27, 2019
BEST ANSWER: I've got a 2016 , which is the same, fit my bike fine.
4.9 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
1
0
0
0
Finish
5.0 / 5
Fit
5.0 / 5
Quality
5.0 / 5
Value
5.0 / 5
Would you recommend this product?
Yes (7)
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Finally, well made american bars that compete with the big boys
These are the 3rd set of bars I've purchased for my 2012 Flhx (first from Dennis Kirk) and i'm very pleased. the other's I sent back due to manufacturing defects and was losing hope of getting a good pair of bagger bars for under 2 bills but these fit the bill! Fantastic fit and finish, chrome plating and overall look. Just as good as the Chubby's I had on my old Road King at about half the price. Expertly packaged, shipped and delivered fast so no complaints on anything. Thanks for delivering a product that is actually better than advertised!
Kbob - Denver Colorado
January 17, 2017
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Comportable Bars!
Very comfortable. Glad i went with the 12in.
Bars Baby!
Bars Baby!
May 15, 2018
Purchased
over 3 years ago
No Review Title Entered By User
No Review Text Entered By User
June 7, 2016
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Bars shipped out in a timely manner and were boxed up for shipment very nice so no damage would occur.
Bars are very nice
September 7, 2016
Purchased
over 3 years ago
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Best thing for a tall rider
Love the new ape hangers, improves the ride greatly.
May 26, 2017
Purchased
over 3 years ago
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Thank you i am very happy.
Shipping fast
March 23, 2017
Purchased
over 3 years ago
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Differently a value add.
May 10, 2017
Purchased
over 3 years ago
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Well pleased
Excellent fit, look great, heavy made bars.
May 4, 2017
Purchased
over 3 years ago