Dennis Kirk Inc.
Search Within
Ride Search
Top 3 Product Matches

Total Control Passing Lamp Harness - 5495

1 / 1

Total Control Passing Lamp Harness - 5495

Original Price: $22.49

Closeout Price: $20.24 10% off!
Make sure this fits your ride
In Stock - 1 on Hand
Ships Today!
Order in the next
0 2
HR
5 0
MIN
3 6
SEC
Kuryakyn Total Control Passing Lamp Harness - 5495
  • Take control of your passing lamps
  • Lamps are no longer automatically turned off when the headlamp is switched form low to high beam
  • Enabling passing lamps to remain lit with the high beam greatly improved lighting
  • A must have when upgrading lighting to Kuryakyn Phase 6 or Phase 7 L.E.D. headlamps and passing lamps

NOTE: Fits listed models with passing lamps

Included Items:

(1) Total control passing lamp wiring harness

(1) Dielectric grease pack

Instructions

Specifications
Mfg #: 5495
Part #: 216796
Type Adapter
Type Adapter - Headlight Wiring
Units Each
Weight 0.30 lbs
Alternate/OEM Part Number(s):
20500184
UPC Code:
191209017132
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Resources & Manuals
Fitment for Kuryakyn Total Control Passing Lamp Harness - 5495

Part 216796 fits the following machines

Harley-Davidson
  • Heritage Softail - FLST 2006
  • Heritage Softail Classic - FLSTC 1996-2006, 2009-2017
  • Heritage Softail Classic (EFI) - FLSTC 2007-2008
  • Heritage Softail Classic Injected - FLSTC I 2001-2006
  • Heritage Softail Injected - FLST I 2006
  • Heritage Softail Special - FLSTN 1996
  • Heritage Softail Springer - FLSTS 1997-2003
  • Heritage Softail Springer Injected - FLSTS I 2001-2003
  • Road King - FLHR 1997-2006, 2009-2013
  • Road King (EFI) - FLHR 2007-2008
  • Road King Classic - FLHRC 2009-2013
  • Road King Classic (EFI) - FLHRC 2007-2008
  • Road King Classic Injected - FLHRC I 1998-2006
  • Road King Custom - FLHRS 2004-2006
  • Road King Custom (EFI) - FLHRS 2007
  • Road King Custom Injected - FLHRS I 2004-2006
  • Road King CVO/SE - FLHRSE 5 2013
  • Road King CVO/SE (EFI) - FLHRSE 3 2007
  • Road King CVO/SE (EFI) - FLHRSE 4 2008
  • Road King Injected - FLHR I 1997-2006
  • Road King Injected CVO/SE - FLHRSE I 2002
  • Road King Injected CVO/SE - FLHRSE I 2 2003
  • Softail Convertible CVO/SE - FLSTSE 2010
  • Softail Convertible CVO/SE - FLSTSE 2 2011
  • Softail Convertible CVO/SE - FLSTSE 3 2012
  • Softail Cross Bones - FLSTSB 2009-2011
  • Softail Cross Bones (EFI) - FLSTSB 2008
  • Softail Deluxe - FLSTN 2005-2006, 2009-2017
  • Softail Deluxe (EFI) - FLSTN 2007-2008
  • Softail Deluxe CVO/SE - FLSTNSE 2014-2015
  • Softail Deluxe Injected - FLSTN I 2005-2006
  • Softail Fat Boy - FLSTF 1996-2006, 2009-2017
  • Softail Fat Boy (EFI) - FLSTF 2007-2008
  • Softail Fat Boy Injected - FLSTF I 2001-2006
  • Softail Fat Boy Injected CVO/SE - FLSTFSE 2005
  • Softail Fat Boy Injected CVO/SE - FLSTFSE 2 2006
  • Softail Fat Boy Lo - FLSTFB 2010-2016
  • Softail Springer Classic - FLSTSC 2005-2006
  • Softail Springer Classic (EFI) - FLSTSC 2007
  • Softail Springer Classic Injected - FLSTSC I 2005-2006
Reviews & Questions
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
On a heritage, where does this connect? Inside the headlight there is only the headlight wire, no extra plugs etc
A shopper on Feb 10, 2019
BEST ANSWER: my heritage is a 06 out of your headlight is a yellow wire with a female end which goes to your spotlight switch lefthand side of headlight housing disconnect from switch and cap it off with a male end and I used shrink tube and seal it up and ran wire parallel to another wire tie them. Then red wire off fuse block plugs into spotlight switch which yellow wire was attached to.That should do it.You be happy with the results. RIDE SAFE
4.0 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
2
0
0
1
Finish
4.5 / 5
Fit
3.8 / 5
Quality
4.3 / 5
Style
4.5 / 5
Value
4.2 / 5
Would you recommend this product?
Yes (3)
No (1)
Fit
4 / 5
Quality
4 / 5
Style
4 / 5
Value
5 / 5
Awesome Light with LEDs
Installed very easily. My electrical lead was just exposed enough so I didn't have to move the fuel tank. Now with passing lamps and high beam at night I can see the deer in the next county!
One inconvenience is the error codes being reported. I assume the lower amperage draw of the LEDs fools the control unit into thinking a light bulb is out. Doesn't interfere with cycle operation - just annoying to have to clear them when performing maintenance.
June 8, 2015
Farmington Hills, MI
Fit
3 / 5
Quality
5 / 5
Style
5 / 5
Value
4 / 5
Passing Lamp Harness
This kit allowed me to run the passing lights along with my headlight on bright. The wiring color listed in the included instructions was wrong. (I think it said orange with a white stripe.) But the color listed on the instructions on this site were correct. (I think it said red and the wire was a maroon red. - It's the wire with the built in fuse.) On MY 99 Road King, the original wire was soldered to the switch and had to be melted off, and the harness connector in the kit was too big for my switch, so I had to cut the connector off,and solder the wire to the switch. (This is the maroon wire that has a built in fuse.) My switch MIGHT not have been the original, since I am not the original owner. So this might be a plug and play harness on yours. But,this was very easy to fix, but bear in mind, you MIGHT need a soldering iron to make it work on yours too.
July 30, 2013
Peoria, AZ
Finish
3 / 5
Fit
1 / 5
Quality
2 / 5
Value
1 / 5
Would you recommend this product?
No
Waste of money - Not a fit for 2000 RK
I would not consider this an "exact fit" for a 2000 Road King. Soldering was required. I also question the sanity of a fuse in a harness that is buried in the Headlamp Nacelle.

At the end of the day, through the learning process of getting this to work on my bike, I discovered much cleaner and simpler approaches to accomplishing the same thing, well documented on the web.
May 2, 2017
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Great lighting addition
Works for rk or softail. Nice to have both high beam and driving lights on dark roads. Easy install and functions as advertised
September 5, 2016
Va Beach , VA
Purchased
over 4 years ago
Ride:
2012 RK
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Passing lamps harness
Outstanding product
April 30, 2020
Elgin, TX
Purchased
7 months ago
Ride:
2000 Twin Cam Heritage Springer
Finish
5 / 5
Fit
5 / 5
Quality
5 / 5
Value
5 / 5
Would you recommend this product?
Yes
Great for LED lighting
Easy to install as it says plug and play. Fixed the issue I had with fast blinking LED turn signals
May 4, 2017
Purchased
over 3 years ago