Boards should not be installed in place of a footpeg on a peg mount secured with a single fastener and no anti-rotation mechanism. The board will apply too much force and loosen the mount from the bike
The use of adjustable shift and brake linkages is recommended for driver applications. Placing the floorboards on mounts intended for footpegs may prohibit them from folding up in the same manner as the stock peg. While the board can be rotated for a more comfortable position, some angles may cause the board to contact other components on the bike that will prevent the board from folding up completely. Before ordering, be aware of components on the bike that may interfere with the placement of floorboards.
Not for use on metric motorcycle OEM footpeg mounts
(2) Floorboard assemblies
(2) 5/16-18 x 1 in. Sockethead cap screws
(2) 5/16 in. Flat washers
ATTENTION: It is the installers responsibility to ensure that all of the fasteners (including pre-assembled) are tightened before operation of the motorcycle. Kuryakyn will not warranty components lost due to improper installation. Periodic maintenance may be required.