Overview of Kuryakyn Magnum Quick Clamp 1-1/2 in. I.D. - 1001
- Stainless steel construction for fast, simple installation
- No more stripped bolt heads
- Fits some engine guards and Boss Hoss
Choose the correct size clamp for your application
In order to do this you will need to determine what size engine guard you have on your motorcycle
If you do not have a dial caliper available, you can easily determine the diameter of the engine guard
You will need a piece of heavy paper or cardboard, a ruler, a pencil, and a scissors
Use the pencil and ruler to make to marks on the edge of the paper 1 in. apart
Take the scissors and cut lines perpendicular to the edge of the paper at the marks you just made
Fold the resulting flap of paper out of the way
Next, take the piece of paper to the bike and check to see if the tubing will slip into the opening youve made in the edge of the paper
If the opening is too small, repeat the procedure enlarging the opening to 1-1/8, 1-1/4, 1.35, and 1-1/2 until you find one that will fit
We have made a lot of friends with these!
Stainless steel construction for superior strength and hinged design for fast simple installation
No more stripped bolt heads!
By the way. . .
Cobra engine guards are 1-1/4 diameter
Frame down tubes on VN1500 and some other Japanese cruisers are 1.35 diameter
The curved part of a Valkyrie engine guard in front of the valve covers will accept a 1-1/8 diameter clamp
Frame down tubes on a V-Star 650 are 1-1/4 in diameter
(2) Magnum quick clamps
(2) 1/2 in. ID x 3/32 in. Thick spacers
Specs for Kuryakyn Magnum Quick Clamp 1-1/2 in. I.D. - 1001
|Clamp Max I.D.
||1 1/2 in.
|Clamp Min. I.D.
||1 1/2 in.
|Color - Primary
Alternate/OEM Part Number(s):