• Install a passenger board in place of a foot peg
• Kit includes finely chromed ISO-passenger boards and a cast bracket to connect the board to the slip resistant splined adapter (sold separately)
• Board dimensions 9 in. x 4 1/2 in.
  
  NOTE: H-D Applications:
  Not recommended for use on mounts fastening to the motorcycle with only a single fastener. Leverage applied by the board will cause the mount to twist and loosen from the motorcycle. We recommend Anti-Rotation Peg Mounts Part No. 49-4441, when replacing footpegs
  
  NOTE: Metric Applications:
  Depending on the orientation of the footpeg mount, these boards may not fold up in the same manner as the stock footpeg. Some mounting angles may result in the floorboard making contact with the other components on the motorcycle. Check ground clearance and component clearance before riding the motorcycle

ATTENTION: It is the installers responsibility to ensure that all of the fasteners (including pre-assembled) are tightened before operation of the motorcycle. Kuryakyn will not warranty components lost due to improper installation. Periodic maintenance may be required.

(2) Chrome aluminum floorboards

(2) 5/16"-18  3/4" Socket cap bolts

(2) Anti-Seize packets

Instructions