Dennis Kirk Inc.
Legendary Service... Ask Your Friends - Since 1969
Need Assistance?
Over 150K Powersport Items - In-Stock and ready to ship today! View tires, apparel, helmets, exhaust and more!

Kuryakyn ISO Grips - 6236

  • Part #: 504148
  • Manufacturer Part #: 6236

MSRP Price: $79.99

Our Price: $71.99

You Save:
$8.00 (10%)
4 on Hand

Ships Today!
If ordered in:

1 4 : 3 7 : 0 9
  • HOUR
  • MIN
  • SEC

Overview of Kuryakyn ISO Grips - 6236

  • Combining style and comfort, the Kuryakyn ISO Grips are a quantum leap forward in handgrip design
  • Like the popular ISO Pegs, these grips provide a soft, non-slip surface that isolates the driver from operating vibration
  • Recessed areas between the ISO Pads permit air flow for added comfort in hot weather
  • The knurled accent ring adds a classy detail
  • Chrome with chrome accent rings
  • Sold in pairs


Included Items:

(2) Chrome aluminum grips W/rubber inserts

(1) Tube of Black Widow™ adhesive

Instructions

Grip length: 5"      

Grip OD: 1-5/8"          

Handlebar: 1"          

Overall length: 5-3/4"   

Specs for Kuryakyn ISO Grips - 6236

Color - Grips Chrome
Diameter - Handlebar 1 in.
Finish Chrome
Material - Grips Rubber
Type - Grips Twist Throttle
Units Pair
Weight 1.18 lbs

Specs for Kuryakyn ISO Grips - 6236

Color - Grips Chrome
Diameter - Handlebar 1 in.
Finish Chrome
Material - Grips Rubber
Type - Grips Twist Throttle
Units Pair
Weight 1.18 lbs

Fitment for Kuryakyn ISO Grips - 6236

See if this part fits your ride

Part 504148 fits the following machines

Honda
  • 2003 Honda VF750C Magna
  • 2002 Honda VF750C Magna
  • 2001 Honda VF750C Magna
  • 2000 Honda VF750C Magna
  • 1999 Honda VF750C Magna
  • 1998 Honda VF750C Magna
  • 1997 Honda VF750C Magna
  • 1996 Honda VF750C Magna
  • 1995 Honda VF750C Magna
  • 1994 Honda VF750C Magna
  • 1996 Honda VF750CD Magna Deluxe
  • 1995 Honda VF750CD Magna Deluxe
  • 2007 Honda VT1100C Shadow Spirit
  • 2006 Honda VT1100C Shadow Spirit
  • 2005 Honda VT1100C Shadow Spirit
  • 2004 Honda VT1100C Shadow Spirit
  • 2003 Honda VT1100C Shadow Spirit
  • 2002 Honda VT1100C Shadow Spirit
  • 2001 Honda VT1100C Shadow Spirit
  • 2000 Honda VT1100C Shadow Spirit
  • 1999 Honda VT1100C Shadow Spirit
  • 1998 Honda VT1100C Shadow Spirit
  • 1997 Honda VT1100C Shadow Spirit
  • 1999 Honda VT1100C2 Shadow American Classic Edition (A.C.E.)
  • 1998 Honda VT1100C2 Shadow American Classic Edition (A.C.E.)
  • 2007 Honda VT1100C2 Shadow Sabre
  • 2006 Honda VT1100C2 Shadow Sabre
  • 2005 Honda VT1100C2 Shadow Sabre
  • 2004 Honda VT1100C2 Shadow Sabre
  • 2003 Honda VT1100C2 Shadow Sabre
  • 2002 Honda VT1100C2 Shadow Sabre
  • 2001 Honda VT1100C2 Shadow Sabre
  • 2000 Honda VT1100C2 Shadow Sabre
  • 2002 Honda VT1100C3 Shadow Aero
  • 2001 Honda VT1100C3 Shadow Aero
  • 2000 Honda VT1100C3 Shadow Aero
  • 1999 Honda VT1100C3 Shadow Aero
  • 1998 Honda VT1100C3 Shadow Aero
  • 1999 Honda VT1100D2 Shadow American Classic Edition (A.C.E.)
  • 2001 Honda VT1100T Shadow American Classic Edition (A.C.E.) Tourer
  • 2000 Honda VT1100T Shadow American Classic Edition (A.C.E.) Tourer
  • 1999 Honda VT1100T Shadow American Classic Edition (A.C.E.) Tourer
  • 1998 Honda VT1100T Shadow American Classic Edition (A.C.E.) Tourer
  • 2007 Honda VT600C Shadow VLX
  • 2006 Honda VT600C Shadow VLX
  • 2005 Honda VT600C Shadow VLX
  • 2004 Honda VT600C Shadow VLX
  • 2003 Honda VT600C Shadow VLX
  • 2002 Honda VT600C Shadow VLX
  • 2001 Honda VT600C Shadow VLX
  • 2000 Honda VT600C Shadow VLX
  • 1999 Honda VT600C Shadow VLX
  • 1997 Honda VT600C Shadow VLX
  • 1996 Honda VT600C Shadow VLX
  • 1995 Honda VT600C Shadow VLX
  • 1994 Honda VT600C Shadow VLX
  • 1993 Honda VT600C Shadow VLX
  • 1992 Honda VT600C Shadow VLX
  • 1991 Honda VT600C Shadow VLX
  • 1989 Honda VT600C Shadow VLX
  • 1988 Honda VT600C Shadow VLX
  • 2007 Honda VT600CD Shadow VLX Deluxe
  • 2006 Honda VT600CD Shadow VLX Deluxe
  • 2005 Honda VT600CD Shadow VLX Deluxe
  • 2004 Honda VT600CD Shadow VLX Deluxe
  • 2003 Honda VT600CD Shadow VLX Deluxe
  • 2002 Honda VT600CD Shadow VLX Deluxe
  • 2001 Honda VT600CD Shadow VLX Deluxe
  • 2000 Honda VT600CD Shadow VLX Deluxe
  • 1999 Honda VT600CD Shadow VLX Deluxe
  • 1998 Honda VT600CD Shadow VLX Deluxe
  • 1997 Honda VT600CD Shadow VLX Deluxe
  • 1996 Honda VT600CD Shadow VLX Deluxe
  • 1995 Honda VT600CD Shadow VLX Deluxe
  • 1994 Honda VT600CD Shadow VLX Deluxe
  • 1993 Honda VT600CD Shadow VLX Deluxe
  • 2000 Honda VT600CD2 Shadow VLX
  • 1999 Honda VT600CD2 Shadow VLX
  • 2000 Honda VT750C Shadow American Classic Edition (A.C.E.)
  • 1999 Honda VT750C Shadow American Classic Edition (A.C.E.)
  • 1998 Honda VT750C Shadow American Classic Edition (A.C.E.)
  • 2003 Honda VT750CD Shadow American Classic Edition (A.C.E.) Deluxe
  • 2002 Honda VT750CD Shadow American Classic Edition (A.C.E.) Deluxe
  • 2001 Honda VT750CD Shadow American Classic Edition (A.C.E.) Deluxe
  • 2000 Honda VT750CD Shadow American Classic Edition (A.C.E.) Deluxe
  • 1999 Honda VT750CD Shadow American Classic Edition (A.C.E.) Deluxe
  • 1998 Honda VT750CD Shadow American Classic Edition (A.C.E.) Deluxe
Triumph
  • 2010 Triumph America 790
  • 2009 Triumph America 790
  • 2008 Triumph America 790
  • 2007 Triumph America 790
  • 2009 Triumph Bonneville
  • 2008 Triumph Bonneville
  • 2007 Triumph Bonneville
  • 2006 Triumph Bonneville
  • 2005 Triumph Bonneville
  • 2004 Triumph Bonneville
  • 2003 Triumph Bonneville
  • 2002 Triumph Bonneville
  • 2001 Triumph Bonneville
  • 2015 Triumph Bonneville T100
  • 2014 Triumph Bonneville T100
  • 2013 Triumph Bonneville T100
  • 2012 Triumph Bonneville T100
  • 2011 Triumph Bonneville T100
  • 2010 Triumph Bonneville T100
  • 2004 Triumph Bonneville T100
  • 2003 Triumph Bonneville T100
  • 2002 Triumph Bonneville T100
  • 2010 Triumph Bonneville T100 1960 Anniversary Edition 865
  • 2016 Triumph Bonneville T100 Black 865
  • 2015 Triumph Bonneville T100 Black 865
  • 2014 Triumph Bonneville T100 Black 865
  • 2009 Triumph Rocket III 2300
  • 2008 Triumph Rocket III 2300
  • 2007 Triumph Rocket III 2300
  • 2006 Triumph Rocket III 2300
  • 2005 Triumph Rocket III 2300
  • 2004 Triumph Rocket III 2300
  • 2009 Triumph Rocket III Classic 2300
  • 2008 Triumph Rocket III Classic 2300
  • 2007 Triumph Rocket III Classic 2300
  • 2006 Triumph Rocket III Classic 2300
  • 2016 Triumph Speedmaster 865
  • 2015 Triumph Speedmaster 865
  • 2014 Triumph Speedmaster 865
  • 2013 Triumph Speedmaster 865
  • 2012 Triumph Speedmaster 865
  • 2011 Triumph Speedmaster 865
  • 2010 Triumph Speedmaster 865
  • 2009 Triumph Speedmaster 865
  • 2008 Triumph Speedmaster 865
  • 2007 Triumph Speedmaster 865
  • 2006 Triumph Speedmaster 865
  • 2005 Triumph Speedmaster 865
  • 2016 Triumph Thruxton 865
  • 2015 Triumph Thruxton 865
  • 2014 Triumph Thruxton 865
  • 2013 Triumph Thruxton 865
  • 2012 Triumph Thruxton 865
  • 2011 Triumph Thruxton 865
  • 2010 Triumph Thruxton 865
  • 2009 Triumph Thruxton 865
  • 2008 Triumph Thruxton 865
  • 2007 Triumph Thruxton 865
  • 2006 Triumph Thruxton 865
  • 2005 Triumph Thruxton 865
  • 2010 Triumph Thruxton SE 865
4.9 / 5.0
178 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
158
18
2
0
0
Fit
4.8 / 5
Quality
4.8 / 5
Style
4.9 / 5
Value
4.7 / 5
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Excellent Product.
These grips were easy to install and far more comfortable than any stock grip I have ever encountered. One thing to remember however, if you want the rotational position of the grips to match on each side, INSTALL THE THROTTLE SIDE FIRST. The reason for this is because the throttle cables dictate the position of the grip. Then install the left grip and position it to match the right grip. I also found it helpful to position the left grip without glue and using a sharpy marker, put a small dot on the grip and another small dot on the switch box housing. By doing this, when you remove the grip to apply the glue and re-install permanantly you will know exactly where to position it and not worry about the glue drying before you get it adjusted right. Just line up the dots. Use a little alcohol on a cotton ball to erase the dots. Now, go for a ride and enjoy your new grips!
November 16, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Excellent Product.
These grips were easy to install and far more comfortable than any stock grip I have ever encountered. One thing to remember however, if you want the rotational position of the grips to match on each side, INSTALL THE THROTTLE SIDE FIRST. The reason for this is because the throttle cables dictate the position of the grip. Then install the left grip and position it to match the right grip. I also found it helpful to position the left grip without glue and using a sharpy marker, put a small dot on the grip and another small dot on the switch box housing. By doing this, when you remove the grip to apply the glue and re-install permanantly you will know exactly where to position it and not worry about the glue drying before you get it adjusted right. Just line up the dots. Use a little alcohol on a cotton ball to erase the dots. Now, go for a ride and enjoy your new grips!
November 16, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
4 / 5
Great Grips - BeVery Careful When Installing!
Kuryakyn makes great products - ISO grips included. I wanted a pair of ISO grips to match the ISO foot pegs I installed last Fall. Grips feel great and reduce vibration, not to mention they add more chrome and "class" to my bike.

Installation: Read the installation directions very carefully as the glue sets up INSTANTLY if you stop moving the grip at all. I made the mistake of applying glue to the throttle housing along with the inside of the grip (This is how it was done on the CruiserCustomizing.com video) - not good. The glue on the throttle housing started "plowing" and had I continued pushing, I would have glued the throttle side grip to the housing, making the throttle inoperable. That was a $70 mistake because once I stopped pushing the grip onto the handlebar, it glued instantly, and about two inches from where it needed to be. I had to literally cut the grip apart (destroying it) in order to remove it from the throttle housing. $70 later, I had a new set of grips and tried the installation again. This time I only applied glue to the inside of the grip - per Kuryakyn's instructions, and it worked fine. The trick is that you cannot stop moving the grip for any reason - not even a micro-second (and I am not exaggerating at all here) - slide the grip on in one continuous motion and do it quickly. I recommend doing a couple of dry "practice runs" so you know what to expect. Learn from my mistake and do it right the first time. Installation of the clutch side was much easier now that I knew what to do - again, I only applied glue to the inside of the grip, not on the handlebar itself. There is no room for the extra glue to work under the grip so it all gets pushed up to the end of the grip which is what you do not want.

Note: When dry-fitting the grips, take a marker (which rubbed right off the chrome) and mark the grip and housing so you know exactly where you want the grip to be when done. Again, you will have absolutely no time to play around with the position of the grip, as once it's on, it's on!!! Also, determine if you want the grips to match (mounting position) when the throttle is closed or if you want it to match when you have the throttle opened up. That is just a personal preference.

I plan to add some color accent rings to personalize my grips and may even consider a Throttle Boss.

The glue - I'd rather have a more forgiving glue that may take longer to cure, but at the same time would allow you to take your time with installation and final adjustment. Some good videos of installation (other than just Harley Davidson models) would be very helpful because it might prevent having to spend another $70 when the first attempt at installing the grips failed.
April 1, 2013
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
4 / 5
Great Grips - BeVery Careful When Installing!
Kuryakyn makes great products - ISO grips included. I wanted a pair of ISO grips to match the ISO foot pegs I installed last Fall. Grips feel great and reduce vibration, not to mention they add more chrome and "class" to my bike.

Installation: Read the installation directions very carefully as the glue sets up INSTANTLY if you stop moving the grip at all. I made the mistake of applying glue to the throttle housing along with the inside of the grip (This is how it was done on the CruiserCustomizing.com video) - not good. The glue on the throttle housing started "plowing" and had I continued pushing, I would have glued the throttle side grip to the housing, making the throttle inoperable. That was a $70 mistake because once I stopped pushing the grip onto the handlebar, it glued instantly, and about two inches from where it needed to be. I had to literally cut the grip apart (destroying it) in order to remove it from the throttle housing. $70 later, I had a new set of grips and tried the installation again. This time I only applied glue to the inside of the grip - per Kuryakyn's instructions, and it worked fine. The trick is that you cannot stop moving the grip for any reason - not even a micro-second (and I am not exaggerating at all here) - slide the grip on in one continuous motion and do it quickly. I recommend doing a couple of dry "practice runs" so you know what to expect. Learn from my mistake and do it right the first time. Installation of the clutch side was much easier now that I knew what to do - again, I only applied glue to the inside of the grip, not on the handlebar itself. There is no room for the extra glue to work under the grip so it all gets pushed up to the end of the grip which is what you do not want.

Note: When dry-fitting the grips, take a marker (which rubbed right off the chrome) and mark the grip and housing so you know exactly where you want the grip to be when done. Again, you will have absolutely no time to play around with the position of the grip, as once it's on, it's on!!! Also, determine if you want the grips to match (mounting position) when the throttle is closed or if you want it to match when you have the throttle opened up. That is just a personal preference.

I plan to add some color accent rings to personalize my grips and may even consider a Throttle Boss.

The glue - I'd rather have a more forgiving glue that may take longer to cure, but at the same time would allow you to take your time with installation and final adjustment. Some good videos of installation (other than just Harley Davidson models) would be very helpful because it might prevent having to spend another $70 when the first attempt at installing the grips failed.
April 1, 2013
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Great product.
These grips are a great product and value. They are a welcome upgrade to prevent had fatigue and numb hands. They are very easy to install and look nice on the bike.
May 18, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Great for older hands!
The grips installed fast and easy and are super comfortable on your hands.
May 9, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Very Nice
Grips are as expected and feel awesome while riding. Do not get to disturbed about the left grip installation and all the warnings...it is not that hard.
September 13, 2010
Fit
5 / 5
Quality
5 / 5
Style
4 / 5
Value
4 / 5
Grab this!
NO MORE CRAMPS ! Fantastic grips! Air flows around my fingers now & since it isn't like grabbing a broomstick, my hands no longer cramp!
March 28, 2010
Fit
5 / 5
Quality
5 / 5
Style
5 / 5
Value
5 / 5
Work great for smaller hands too
I purchased these after a lot of deliberation and reading lots of reviews, that's how I am. The DK site had the best price/rep combo. My cruiser came with metal grips with O rings and I couldn't ride 10 miles without numb hands. I have small hands for a guy and my only concern getting these is I saw in the reviews that they were "fatter" grips and good for large hands. When they showed up and I took them out of the package they did feel chunky. Installation looked simple enough but for $25 I had them professionally installed. They went on quick and easy and came out looking great. I've rode for a few hundred miles now with them and no more tingles. Even though they are substantial in my hands they have a nice way of conforming to your grip and put your hand in a natural comfortable position. They also do what they say for shock and vibration absorbtion. So smaller handed guys, ladies, I would say great product and recommended.
August 27, 2010
Fit
5 / 5
Quality
5 / 5
Style
4 / 5
Value
4 / 5
Grab this!
NO MORE CRAMPS ! Fantastic grips! Air flows around my fingers now & since it isn't like grabbing a broomstick, my hands no longer cramp!
March 28, 2010

Instructions and Manuals for Kuryakyn ISO Grips - 6236

You May Also Be Interested In