Since their introduction for HD Models in 1992, The Hypercharger has been widely recognized as one of the most cost effective performance modifications available. When the demand arose for adaptations to the Metric Cruisers we expected similar performance increases, but never expected to see the gain common on these engines.
The performance increase comes from simply letting the engine breathe. No decrease in longevity or drivability should be expected after normal, careful installation and proper jetting Aside from the desirable gains in performance, the Hypercharger is one of the most striking enhancements you can make to your bike. The cases are beautifully chromed with trap doors and butterflies available separately in a wide array of colors Included Items: (1) Black hypercharger assembly (1) Black aluminum air cleaner adapter (1) Black steel support bracket (1) Black plastic inlet flow-plate (1) 6mm-1.00 x 30mm socket head screw (2) 5mm-.80 x 14mm socket head screws (1) 6mm flat washers (2) 5mm split lock washers (1) 16 in. black rubber vacuum hose (1) black plastic straight hose fitting (1) 1/2 in. barbed elbow hose fitting with 3/8 in. NPT (2) Gaskets (1) Adhesive back gasket (3) 1/4 in.-20 x 5/8 in. socket head screws Manual The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. Due to these legal restrictions this part cannot be shipped to California. |
Color | Black |
---|---|
Mfg #: | 9428 |
Part #: | 188163 |
Type | Air Cleaner |
Units | Kit |
Weight | 4.75 lbs |
Part 188163 fits the following machines